Active Member
|
[China]
Address: No. 601, Anxin Road, ShaCheng Street,Economic And Technological Development Zone,Wenzhou,Zhejiang Pro.China
Contact name:
Zhejiang Wellnit Mechanical Technology Co.,Ltd |
|
|
Thick Steel Plate Beveling Machine Strong Motors 6400W Espcial For Thick Up To 100mm Plate
The machine special for thick plate bevel and milling groove slope is large. The processing angle can be adjusted 0-90degree. The maximum plate thickness is 6-80mm and the processing speed is 0-1.4m per minute.Wide range of applicable plate types: applicable to carbon steel, chromium steel, cast iron, stainless steel, hard plastic and other plates.The processing method is elegant and flexible, and the large and small plates can be easily processed (the machine can walk the groove by itself when processing the super large plate with the plate bracket; the small plate processing machine will keep still and the plate will automatically move for groove processing).Complete cold cutting without changing the original material of the plate.The processing speed can be adjusted freely (equipped with double motors, powerful power).It is easy to operate and easy to use.High safety factor of equipment.
Features:
1. Safety lock, Rear feed motor design and independent design of electric box. more sage.
2. OL Protection
3. Digital Display, Easy processing with Operation.
4. Feed adjustable,speed adjustable
5. Angle Adjustable in range
6. Milling surface reach Ra 3.2-6.3
7.Available for V/Y type of Bevel and milling to Vertical.
8.Processing material: Stainless steel, carbon steel,AL Alloy etc.
Technical Parameters:
| Power Supply | AC 380V 50HZ |
| Total Power | 6400W |
| Spindle Speed | 1050r/min |
| Feed Speed | 0-1500mm/min |
| Clamp Thinkness | 8-100mm |
| Clamp Width | >200mm |
| Processing Length | >300mm |
| Bevel Angle | 10°-90° Adjustable |
| Single Bevel Width | 1-30mm |
| Bevel Width | 1-100mm |
| Cutter Plate | φ100mm |
| Cutter Qty | 6pcs |
| Workable Height | 820-860mm |
| Travel Space | 800*800mm |
| Net Weight | 440kg |
| Gross Weight | 480kg |
| Package Size | 790*790*133mm |
Machine advantages:
Machine on site:
Before you place order to us, please let us know the following information:
1. Choose the right Model
2. Confirm your electric power supply ( Voltage, frequency and phase)
3. Confirm the milling angel required
4. Confirm the welding joint required (U,V or others)
5. Advise your processing material ( Carbon steel, stainless steel or others)
6. Other special demands about machine
7. The spare parts needed
