Active Member
|
[China]
Address: No. 601, Anxin Road, ShaCheng Street,Economic And Technological Development Zone,Wenzhou,Zhejiang Pro.China
Contact name:
Zhejiang Wellnit Mechanical Technology Co.,Ltd |
|
|
Carbon Steel Portable Plate Beveling Machine
Electric Hand Held Plate Beveler
Plate beveling machine is a kind of professional machine that cuts the beveling in the places where the
workpiece needs to be welded before welding in order to guarantee the welding quality in the welding
manufacturing process. Plate beveling machine and plate beveling machine mainly carry out beveling for
the plate, and part of the beveling machine can attach the beveling function of pipe fitting. It is a kind of
welding and cutting auxiliary equipment widely used in ship, metallurgy, steel structure etc.
Plate beveling machine is a kind of beveling machine, which is used for deburring and beveling of metal
sheet before welding. Applicable to steel, cast iron, hard plastic, non-ferrous metals and other materials!
Beveling machine is a special tool for pipe or plate to chamfer beveling on the end face before welding. It
has solved the problems of irregular Angle, rough slope and loud working noise in operation process such
as flame cutting and polishing machine grinding. It has the advantages of simple operation, standard
Angle and smooth surface
Electric groove machine is a convenient and nimble import groove equipment, products using the knife
dish electric rolling washing power to drive machines follow plate moving works, so as to greatly improve
the performance of application of the electric groove machine solves the common equipment imported
electric groove stand with production area, and the problems of inefficient, is a very practical electric
groove machine.
1. This machine mainly used for metal processing,widely used on
vessal,shipyard,boiler manufacturing industry;
2. Can replace flame or electric arc cutting heating processing and processing by
hand;
3. It has a irreplaceable advantage when the work piece is in-disassembling or large-
size or beveling non ferrous metal;
4. Light weight,convenient to carry,compact stucture,reliable performance,high
precision groove;
5. Compared with manual griding machine,efficiency is improved by 30-50 times;
6. Simple operation,safety and reliability;
7. Applicable for maintance industry.
Main performance of the product
PBM-15 groove machine is specially designed for plate groove and chamfer, and
it is a hand-propelled groove processing tool. It is suitable for chamfering metal
plate and groove processing before welding. Light weight (compared with similar
products), small vibration, easy to operate, safe and reliable.
Technical characteristics
(1) The chamfer surface is smooth, flat, without oxidation layer, easy to weld.
(2) Meet K,V,X and Y welding joints.
(3) Applicable to steel plate, cast iron, hard plastic, and can be processed for
chromium steel and other high strength materials.
Notes for use:
1. Before using, check whether the electrical insulation is good and the ground is reliable. When using,
wear insulating gloves, insulating shoes or insulating pads.
2. Before cutting, check whether the rotating part is abnormal, whether the lubrication is good, and point
vehicle test before cutting.
3. Work in the furnace must be carried out by two people working
together.
4. During cutting, the workpiece should be tightened. In the work must be in the iron plate in the middle of
the knife, cutting feed to increase, but not more than 2 mm.
5. Cut off the power after use.
Technical Parameter
| PBM-15 | |
| Voltage | 380V |
| Frequency | 50Hz |
| Power | 1100W |
| Beveling Angle | 30°-60° |
| Milling Width | 1-15mm |
| Speed | 2870r/min |
| Net Weight | 18kg |
