Ellawig companys |
Verified Suppliers
|
|
Flame Retartdance CP Wire Terminal Steel Safety Electrode Tin Zinc
color | yellow |
Application | radio, TV, hi-fi, AMP, EMI filter, switching power supply, and AC application |
size | Small size |
Package Type | Through Hole |
Type | Film Capacitor |
Leads | Radial Leads Of Tinned Wire |
Operating Temperature | -40℃~+110 |
Rated Voltage | 250V/275V/310V/330Vac |
Safety capacitor
For safety and EMC considerations, it is generally recommended to add safety capacitors to the power inlet. At the AC power input end, it is generally necessary to add 3 safety capacitors to suppress EMI conduction interference. They are used in the power supply filter to filter the power supply, and filter the common mode and differential mode interference respectively.
ceramic capacitor
The capacitor ceramics (barium titanate and titanium oxide) with
high dielectric constant are extruded into circular tubes, discs or
discs as the medium, and silver is plated on the ceramics as
electrodes by the sintering method. It is divided into two kinds of
high-frequency porcelain and low-frequency porcelain. Capacitors
with a small positive temperature coefficient of capacitance are
used in highly stable oscillation circuits as loop capacitors and
pad capacitors.
Metallized Polypropylene Capacitors
Detection of small capacitors below 10pF: Because the capacity of fixed capacitors below 10pF is too small, measuring with a multimeter can only qualitatively check whether there is leakage, internal short circuit or breakdown. When measuring, you can use the multimeter R×10k block, and use two test pens to connect the two pins of the capacitor at will, and the resistance value should be infinite. If the measured resistance value (the pointer swings to the right) is zero, it means that the capacitor is damaged by leakage or internal breakdown.