Active Member
|
[China]
Address: B15 Unit 502-3, No. 59, Chengyi North Street, Jimei District, Xiamen City, China
Contact name:Belinda Wu
Xiamen Ai Power Technology Co., Ltd. |
|
|
120KW 150KVA UK Diesel Power Generator With Perkins Electric Diesel Generator
Product characteristics:
1. Our cooperate with famous diesel engine -Powered by famous
Perkins engines.
2. Equipped with famous Brushless alternator - Optional Stamford,
Leroy Somer, Marathon, Meccalte.
3. Equipped with 50°C radiator with fan, enough engine cooling
system guarantee long time working
4. Equipped with advanced generator set control system, ATS system,
remote control system, parallel operation system, optional control
model, Deep sea, Smartgen, ComAp,
5. Generator set use High-quality steel are thickness canopy -- 2MM
to 6MM
6. Generator equipped with 24V DC battery with charger, battery
connects wire.
7. New design of turn-back type for air inflow & air outlet
which can reduce the noise and improve engine efficiency.
8. Beautiful & practicably design, Bottom hole for forklift,
Water outlet & oil outlet for easy maintenance
Generator Specifications:
| GENERAL ENGINE DATA | ||||||||||||
| Engine manufacture | Perkins Engines Company Limited | |||||||||||
| Engine brand | Perkins | |||||||||||
| Engine model | 1106A-70TAG2 | |||||||||||
| Engine speed (rpm) | 1500 | |||||||||||
| Prime power | Standby power | |||||||||||
| Gross engine power (kWb) | 136 | 154 | ||||||||||
| Typical Genset electrical output 0.8pf 25ºC (100 kPa) (KW) | 120 | 132 | ||||||||||
| Cylinders | 6-cylinder, vertical in line | |||||||||||
| Cycle | 4 stroke | |||||||||||
| Induction system | Turbocharged, air charge cooled | |||||||||||
| ICombustion system | Direcct injection | |||||||||||
| Compression ratio | 16.1:1 | |||||||||||
| Bore * Stroke (mm) | 105*135 | |||||||||||
| Cubic capacity (Litre) | 7.01 | |||||||||||
| FUEL SYSTEM | ||||||||||||
| Injector | Mechanical | |||||||||||
| Fuel pump | DP210G | |||||||||||
| Fuel Consumption (litre/hour) | ||||||||||||
| 110% | 36.1 | |||||||||||
| 100% | 33.4 | |||||||||||
| 75% | 24.7 | |||||||||||
| 50% | 16.4 | |||||||||||
| 25% | 9.1 | |||||||||||
| COOLING SYSTEM | ||||||||||||
| Total system capacity(litre) | 21 | |||||||||||
| Engine capacity(litre) | 9.5 | |||||||||||
| Max. top tank temperature (°C) | 110 | |||||||||||
| Thermostat operating range (°C) | 82-93 | |||||||||||
| Shutdown switch setting(°C) | 118 | |||||||||||
| LUBRICATION SYSTEM | ||||||||||||
| Max. total system oil capacity(litre) | 16.5 | |||||||||||
| Min. oil capacity in sump(litre) | 12.4 | |||||||||||
| Max. oil capacity in sump(litre) | 14.9 | |||||||||||
| Oil temperature (in sump) normal continuous operation(°C) | 125 | |||||||||||
| Pressure at max. speed(kPa) | 340 | |||||||||||
| Oil consumption at full load(% of fuel) | <0.1 | |||||||||||
| INDUCTION SYSTEM | ||||||||||||
| Maximum air intake restriction of engine (kPa) | ||||||||||||
| Clean filter | 2 | |||||||||||
| Dirty filter | 3 | |||||||||||
| Combustion air flow(standby/prime power) (m3/min) | 10.67/10.02 | |||||||||||
| EXHAUST SYSTEM | ||||||||||||
| Back pressure for total system (kPa) | 6 | |||||||||||
| Exhaust gas temp. after turbo(standby/prime power)(°C) | 484 | |||||||||||
| Exhaust gas flow (standby/prime power) (m3/min) | 25.53/23.78 | |||||||||||
| ELECTRICAL SYSTEM | ||||||||||||
| Alternator voltage (volts) | 12 | |||||||||||
| Alternator output (amps) | 85 | |||||||||||
| Stater motor type (volts) | 12 | |||||||||||
| Starter motor power (kw) | 4.2 | |||||||||||
Detection and protection function
Over / under speed, Low Oil Pressure, High Water Temperature, under Battery Volt, Low water level,Three failed to start alarm
Over / under voltage,Over current,Over / under frequency, Over Power, Short circuit
Optional features
RS485 (DSE7320)RS485(DSE7320)
Fuel level display and low-alarm
Water level low-alarm
Water Pre- heating in low temperature
ATS
Automatic parallel (DSE6120 / DSE7320)
Other self-definition functions
big power 1mva silenced diesel generator set price
A: It’s 1 year or 1000 running hours whichever comes first. But based on some special project, we can extend our warranty period.
A. Yes, we can accept OEM.
A: We can accept T/T 30% in advance and the balance 70% shall be paid before shipment or LC at sight.
A:Our normal delivery time is 2 to 4 weeks. But if your order is some special engine and alternator, the delivery time will be longer.
