Active Member
|
[China]
Address: B15 Unit 502-3, No. 59, Chengyi North Street, Jimei District, Xiamen City, China
Contact name:Belinda Wu
Xiamen Ai Power Technology Co., Ltd. |
|
|
AI power SDEC series generator set adopts SDEC engine as the power source. Shanghai Diesel Engine Co., Ltd. (SDEC), with SAIC Motor Corporation Limited as its main shareholder, is a large state-owned high-tech enterprise engaged in research and development and manufacture of engines, engine parts, possessing a state-level technical center. Its former was Shanghai Diesel Engine Factory that was established in 1947 and was restructured into a stock-shared company in 1993 with shares of A and B.
SDEC Engine Specifications:
| GENERAL ENGINE DATA | ||||||||||||
| Engine manufacture | Shanghai Diesel Engine Co., Ltd. (SDEC) | |||||||||||
| Engine brand | SDEC | |||||||||||
| Engine model | SC7H250D2 | |||||||||||
| Engine speed (rpm) | 1500 | |||||||||||
| Engine output(kWm) | ||||||||||||
| Standby Power | 185 | |||||||||||
| Prime Power | 168 | |||||||||||
| Engine Type | 4-Cycle, In-line, 6-Cylinder Diesel, water cooled, Turbo charged | |||||||||||
| Bore x Stroke (mm) | 105*124 | |||||||||||
| Displacment (litre) | 6.44L | |||||||||||
| Compression Ratio | 16:1 | |||||||||||
| FUEL SYSTEM | ||||||||||||
| Injection pump | Longkou in-line “P” type | |||||||||||
| Governor | Electric type | |||||||||||
| Fuel Consumption (litre/hour) | ||||||||||||
| 25% load | 10.7 | |||||||||||
| 50% load | 19.9 | |||||||||||
| 75% load | 29.7 | |||||||||||
| 100% load | 39.7 | |||||||||||
| MECHANISM | ||||||||||||
| Type | Over head valve | |||||||||||
| Number of valve | Intake 2, exhaust 2 per cylinder | |||||||||||
| Valve lashes at cold | Intake 0.25mm, Exhaust 0.50mm | |||||||||||
| ENGINEERING DATA | ||||||||||||
| Heat rejection to coolant | 16.8 kcal/sec | |||||||||||
| Air flow | 8.1m3/min | |||||||||||
| Exhaust gas flow | 18.2m3/min | |||||||||||
| Exhaust gas temp. | 600 | |||||||||||
| COOLING SYSTEM | ||||||||||||
| Cooling method | Fresh water forced circulation | |||||||||||
| Coolant capacity | 9.6L | |||||||||||
| Thermostat | ||||||||||||
| Opening temp.°C | 82 | |||||||||||
| Full open temp.°C | 95 | |||||||||||
| Thermostat Type | Wax–pellet type | |||||||||||
| LUBRICATION SYSTEM | ||||||||||||
| Lub. Method | Fully forced pressure feed type | |||||||||||
| Oil pan capacity | Max. 17.5 liters , Min. 15 liters | |||||||||||
| Oil pump | Gear type driven by crankshaft | |||||||||||
| Oil filter | Full flow, cartridge type | |||||||||||
| Lub. Oil | Refer to Operation Manual | |||||||||||
| ELECTRICAL SYSTE | ||||||||||||
| Battery Charging Alternator | 28V×55A alternator | |||||||||||
| Starting motor | 24V×6kW | |||||||||||
| Battery Voltage | 24V | |||||||||||
| Battery Capacity | 150 Ah (recommended) | |||||||||||
Product Photos:
● Famous brand engine couple with high quality alternator
● Large size cooling radiator
● Heavy duty steel base frame
● Strong anti-vibration mat
● Standard free maintenance battery
● AC alternator for battery charger
● Heavy-duty air filter, oil filter, water filter
● Famous brand controller and breaker
● Optional fuel tank, silent canopy, ATS, synchronization panels.
A: It’s 1 year or 1000 running hours whichever comes first. But based on some special project, we can extend our warranty period.
A. Yes, we can accept OEM.
A: We can accept T/T 30% in advance and the balance 70% shall be paid before shipment or LC at sight.
