Active Member
|
[China]
Address: No. 830, No. 52 North 1 West Road, Tiexi District, Shenyang City, Liaoning Province
Contact name:Beerus Chu
Shenyang Sharjah Bearing Co.,Ltd. |
|
|
Bearing 25 eye bearing TIMKEN joint bearing GE25C is a bearing having small friction coefficient and excellent rotational performance designed for outer ring revolution.With the purpose of increasing the load area effectively,the radial gap of Bearing 25 eye bearing TIMKEN joint bearing GE25C is smaller than the general linear bearings. Therefore, it alleviates the impact load, and a stable long life is gained. Since the stud undergoes screw processing and stepped processing, they can be attached easily.
Bearing 25 eye bearing TIMKEN SKF ball joint bearing GE25C spherical plain bearing
Related models and specifications of Bearing 25 eye bearing TIMKEN SKF ball joint bearing GE25C
| No. | Designation | d | D | B | C | dk | r1 min | r2 min | α | Dynamic load | Static load | Weight |
| (KN) | (KN) | (Kg) | ||||||||||
| 1 | GE15ES 2RS | 15 | 26 | 12 | 9 | 22 | 0.3 | 0.3 | 8 | 16 | 84 | 0.027 |
| 2 | GE17ES 2RS | 17 | 30 | 14 | 10 | 25 | 0.3 | 0.3 | 10 | 21 | 106 | 0.041 |
| 3 | GE20ES 2RS | 20 | 35 | 16 | 12 | 29 | 0.3 | 0.3 | 9 | 30 | 146 | 0.066 |
| 4 | GE25ES 2RS | 25 | 42 | 20 | 16 | 35.5 | 0.6 | 0.6 | 7 | 48 | 240 | 0.119 |
| 5 | GE30ES 2RS | 30 | 47 | 22 | 18 | 40.7 | 0.6 | 0.6 | 6 | 62 | 310 | 0.153 |
| 6 | GE35ES 2RS | 35 | 55 | 25 | 20 | 47 | 0.6 | 1 | 6 | 79 | 399 | 0.233 |
| 7 | GE40ES 2RS | 40 | 62 | 28 | 22 | 53 | 0.6 | 1 | 7 | 99 | 495 | 0.306 |
| 8 | GE45ES 2RS | 45 | 68 | 32 | 25 | 60 | 0.6 | 1 | 7 | 127 | 637 | 0.427 |
| 9 | GE50ES 2RS | 50 | 75 | 35 | 28 | 66 | 0.6 | 1 | 6 | 156 | 780 | 0.546 |
| 10 | GE60ES 2RS | 60 | 90 | 44 | 36 | 80 | 1 | 1 | 6 | 245 | 1220 | 1.04 |
| 11 | GE70ES 2RS | 70 | 105 | 49 | 40 | 92 | 1 | 1 | 6 | 313 | 1560 | 1.55 |
| 12 | GE80ES 2RS | 80 | 120 | 55 | 45 | 105 | 1 | 1 | 6 | 400 | 2000 | 2.31 |
| 13 | GE90ES 2RS | 90 | 130 | 60 | 50 | 115 | 1 | 1 | 5 | 488 | 2440 | 2.75 |
| 14 | GE100ES 2RS | 100 | 150 | 70 | 55 | 130 | 1 | 1 | 7 | 607 | 3030 | 4.45 |
| 15 | GE110ES 2RS | 110 | 160 | 70 | 55 | 140 | 1 | 1 | 6 | 654 | 3270 | 4.82 |
| 16 | GE120ES 2RS | 120 | 180 | 85 | 70 | 160 | 1 | 1 | 6 | 950 | 4750 | 8.05 |
| 17 | GE140ES 2RS | 140 | 210 | 90 | 70 | 180 | 1 | 1 | 7 | 1070 | 5350 | 11.02 |
| 18 | GE160ES 2RS | 160 | 230 | 105 | 80 | 200 | 1 | 1 | 8 | 1360 | 6800 | 14.01 |
| 19 | GE180ES 2RS | 180 | 260 | 105 | 80 | 225 | 1.1 | 1.1 | 6 | 1530 | 7650 | 18.65 |
| 20 | GE200ES 2RS | 200 | 290 | 130 | 100 | 250 | 1.1 | 1.1 | 7 | 2120 | 10600 | 28.03 |
| 21 | GE220ES 2RS | 220 | 320 | 135 | 100 | 275 | 1.1 | 1.1 | 8 | 2320 | 11600 | 35.51 |
| 22 | GE240ES 2RS | 240 | 340 | 140 | 100 | 300 | 1.1 | 1.1 | 8 | 2550 | 12700 | 39.91 |
Introduction of spherical plain bearing series:
(1) GE… E model sheet, no lubrication oil every outer ring. Can bear radial load and any direction of smaller
axial load.
(2) GE… ES type single-slit invading.this, lubrication oil groove. Can bear radial load and any direction of
smaller axial load.
(3) GE… ES – 2RS type single-slit invading.this, lubrication oil groove, with seals at both. Can bear radial
load and any direction of smaller axial load.
(4) GEEW… ES – 2RS type single-slit invading.this, lubrication oil groove, with seals at both. Can bear radial
load and any direction of smaller axial load.
(5) GE… ESN type Single slit outer ring, have lubrication oil groove, outer ring have check dynamic slots.
Can bear radial load and any direction of smaller axial load. But the axial load by stop ring inherit, its axial
load capacity reduction.
(6) GE… XSN type A double-slit outer profile especially circle (), there is lubrication oil groove, outer ring
have check dynamic slots. Can bear radial load and any direction of smaller axial load. But the axial load by
stop ring inherit, its axial load capacity reduction.
(7) GE… HS type lubrication oil groove, inner ring has double half invading.this, after wearing clearance can
be adjusted. Can bear radial load and any direction of smaller axial load.
(8) GE… DE1 type Inner ring for hardened bearing steel, outer ring for bearing steel. Inner circle assembling
extrusion, lubricating oil and oil hole. Inner diameter less than 15mm bearings, no lubrication oil and oil
hole. Can bear radial load and any direction of smaller axial load.
(9) GE… DEM1 type Inner ring for hardened bearing steel, outer ring for bearing steel. Inner circle
assembling extrusion, bearing load bearing outer ring pressed, after the end ditch makes bearing axial
fixation. Can bear radial load and any direction of smaller axial load.
(10) GE… DS type Outer ring have assemble slots and lubricating slots. Limited to large size bearings. Can
bear radial load and any direction of smaller axial load (assembly slot side can not bear the axial load).
2. Angular contact joint bearings
GAC… S-type inside and outside circle were hardened bearing steel, outer ring have tanks and oil hole. Can
bear radial load and a direction (joint) axial load.
3. Thrust joint bearings
GX… S-type shaft lap and seat ring are hardening bearing steel, Seat ring have tanks and oil hole. Can bear
a direction of axial load or combined load (right now the radial load value nor larger axial load value of 0.5
times).
4. Fixed-end joint bearings
(1) SI… E type is GE… E type bearings and pole terminal assembly body. With female threaded rod ends,
materials for carbon steels, No lubrication oil groove. Can bear radial load and any direction less or equal
0.2 times radial load of the axial load.
(2) SA… E type is GE… E type bearings and pole terminal assembly body. Fixed-end out-of-band thread,
materials for carbon steels, No lubrication oil groove, can bear radial load and any direction less or equal
0.2 times radial load of the axial load.
(3) SI… ES type is GE… ES type bearings and pole terminal assembly body. With female threaded rod ends,
materials for carbon steels, Have lubrication oil groove. Can bear radial load and any direction less or equal
0.2 times radial load of the axial load.
(4) SA… ES type is GE… ES type bearings and pole terminal assembly body. Fixed-end out-of-band thread,
materials for carbon steels, Have lubrication oil groove. Can bear radial load and any direction less or equal
0.2 times radial load of the axial load.
(5) SIB… S-type with female threaded rod ends, materials for carbon steels, Inner ring for hardened bearing
steel, Have lubrication oil groove. Can bear radial load and any direction less or equal 0.2 times radial load
of the axial load.
(6) SAB… S-type fixed-end out-of-band thread, materials for carbon steels, Inner ring for hardened bearing steel,
It have lubrication oil groove. Can bear radial load and any direction less or equal 0.2 times radial load of the axial load.
(7) SQ… Type for ball head fixed-end joint bearings, fixed-end for carbon steels, Ball head for carburizing steels.
It can bear radial load and any direction of smaller axial load.
If you need the any brands or any models of bearings, please contact me!
Company: Shenyang Sharjah Bearing Co., Ltd.
Email:vyse.c@cqpbearing.com
Skype:008613130506319
WhatsApp:008613130506319
Wechat:008613130506319
