Storage Solar System:5KW With 20KWH Lithium Battery Bank
Main Function
- Solar power will be the first power to supply the load and could be
charged to the battery as power storage.
- Solar system could be running at model of without battery , daytime
use solar power directly, night time use storage power as backup.
- Solar system are available of both single phase and three phase.
- Solar system three phase could be on grid and off grid, complete
and perfect solar system integrated solution, dont need to buy two
inverters.
- Solar inverter is allowable setting by end customers, solar power
fist,electricity power second,battery power third.
- High capacity of lithium battery bank for more than 10 years long
time life design.
- Unique supplier for big power BMS technology , better than market
90% ,customized design to match these solar inverter. Automatic charging and conversion and silent operation and micro
processor control Unique big power BMS technology for.
- Big LCD display with clearly working status and working mode .user
could check the charging current and solar power generation via the
LCD display.
- User could set the working mode according to actual requirement. it can be solar priority or solar power and AC power.
- Three step charging,user could set the charging current according
to the battery capacity or intensity of the sunlight,the maximum
charging current could be 30Amp.
- User could choose battery type to reach the best charging and
protect the battery. also can choose recondition battery.
- With low voltage,over voltage,short circit, over load protection.
- Output isolation,stable and reliable performance. 年Lithium battery bank design, more reliable and longer service
life.
The process of Storage Solar & diesel power generation
system is mainly used to supply power to the load and store the excess
energy into the battery. It has obvious advantages in stability and
continuous power supply.
In many remote areas, the coverage of the power grid is
insufficient and the power grid is unstable, so diesel power
generation will be used. Due to the remote location, once the
generator fails, it is difficult to be repaired in time, which will
inevitably affect work and life. Secondly, the noise and pollution
from diesel generators cannot be solved.
The process of Storage of Solar & diesel power generation
system can solve the problem of diesel power generation being
unstable, impacting the load,costing more, and Pure solar power
generation is difficult to meet the actual load demand, etc.
The automatic voltage regulation function of the Storage Solar
system and diesel power generation can improve the power supply
quality.
When solar power generation cannot meet the requirements, the
diesel generator can be switched to realize continuous power
generation.
The maintenance of solar power generation is easier than that of
diesel generators and the cost is also more economical.
With this combined system, diesel generators can provide greater
power immediately, combined systems can be applied to a wider range
of load systems, such as the use of larger AC loads, impact loads,
etc. It can also better match the load to the system's generation.
This can be done simply by turning on backup power during peak load
periods. Sometimes, the size of the load dictates the need to use a
combined system, with large loads requiring large currents and
high voltages.
Based on technical team members with abundant professional
knowledge, and more than 30 years rich practices & experience
in this specific industry, CSIC is focusing on special package
solution design & supply of water turbine-generator sets and
the auxiliaries according to the special working conditions of the
certain power station. With plenty of industrial resources, CSIC
has strategic alliances with several professional hydropower survey
& design institutes, turbine-generator and auxiliary equipment
manufacturers, working for customized proposals to customers'
projects worldwide on "C2C" basis, providing package solutiond,
technical design and engineering supervision, E&M equipment
supply, installation & commissioning services, free training,
etc.
Until now, we have provided equipment & services to Russia,
Belarus, Chile, Peru, Indonesia, Turkey, New Zeland, D.R.Congo,
South Korea, Nepal, India, Pakistan, Philippines, etc.