SYKM1628 HIGH SPEED THREE COLORS FLEXO PRINTING AND SLOTTING AND
DIE CUTTING MACHINE
★.Machine introduction:
1-This machine is component with the feeding unit,printing
unit,slotting unit,die cutting unit can accomplish the process of
the corrugate paperboard printing and slotting and die cutting.
2-The materials of the body is carbon steel,thickness of body is
60mm,after 24hours heating treatment,making by CNC machine,with
high strength and high precision.
3-All the transmission gear is spiral gear,with low noise and high
precision,gears after high frequency heating and grinding,adopt
automatic circle lubrication.
4-The gear material is 20CrMnti alloy steel,after high frequency
heating and grinding.and the main transmission gear and roller
adopt expansion sleeve connection.
5-Bearing adopt the famous brand made in China like HRB and NSK.
6-The mail motor adopt frequency converters adjust,the frequency is
“Delta” brand made in Taiwan,the PLC also adopt “Delta” brand made
in Taiwan,the contactor adopt “Siemens” brand.the touch screen
adopt Taiwan “DELTA” brand.
7-Ceramic anilox, famous brand in China.
8-Doctor blades, famous brand in China.
9-with separate control electric box to control all the machine
setting which can set by electric.full machine with internet
control system,with internet can control all machine systerm.
- Max.design machine speed: 200 sheets/min.
- Economy produce speed: 180 sheet/min.
- Max. paper coverage area:1650×3000mm
- Min. paper coverage area:450(full block print)×650mm.
- Effective print area:1600×2800mm.
- Printing precision: ≤±0.5mm.
- Slotting and die-cutting precision: ≤±1.5mm.
- The standard thickness of the printing plate:7.2mm.
- Skip feeding size is 1800×3000mm.
- Max. slotting depth:400mm
- Min. slot distance:270×70×270×70mm
- Body thickness 60mm
- Invoter:Delta
- Touch screen and PLC:DELTA
- Contactor:Seimens
- Anilox roller:Haili
- Bearing:HRB and NSK
- Please note: The folder gluer part, the maximum feeding size:
2600x1200 mm
- Unit moving.
- Each unit is electric moving left and right with warning bell. When
unit moving, the bell will be warning to make sure the operator
safe. The moving motor with constant torsional moment which can
buffer the impact of the two units when the operation is wrong.
- After all the units closed, each part is pneumatic locked. There is
also lead locked cylinder which can make each part locked with
bottom-track lock. If the cylinder is not locked, the main motor
will not work.
1-The lead edge feed unit is servo motor control system, Rexroth
brand make in Germany,with long life and no noise,running with high
feeding accuracy for all the machine lift.and servo model feeding
not corrugate board thickness and strength damage.
2-Wind absorbing auxiliary paperboard feeding, can make the
cardboard feed favoringly. The volume of the wind can be adjusted
accord the camber of the paperboard.
3-Electric and PLC control the side baffles move left and
right.electric control the behind baffles move back and front.The
distance between the frontal baffles and the feed table is
synchronous manual adjust.with paper board flat system by
pneumatic.
4-With colorful touch screen show the produce quatity and can be
input the production plan and also show the produce sheets number.
Once the plan is finished, the counter system stops the feeding
part and warns.all the phase of the unit and slotting size can
store 999 orders in the touch screen,save adjust time and save
corrugate board waste from phase adjust,full computer control
system.
5-No pressure type feeding table,corrugate board go inside machine
without thickness and strength decrease.
- Brush dust-removal equipment with dust-absorption blower. This
equipment can clear the dust on the surface of the
cardboard,improve the printing quality.
- Cardboard feeding roller.
- The up cardboard feeding roller is steel tube without gaps,be
covered with the hardwearing rubber, after balance correction.
- The down cardboard feeding roller is is steel tube without
gaps,embossing and hard chromium plating, after balance correction.
- The distance between the up cardboard feeding roller and down
cardboard feeding roller is adjusted by electric,touch screen show
the adjust date,the adjusting scope is 2-12mm.The up and down feed
roller adopt the crosshead connect with the drive gears,when adjust
the distance between the up and down rollers,the distance between
the two driver gears of the up and down rollers will not changed.
- “Automatic zero-returning” and “printing plate cleaned memory”
function.
- .The feed unit, printing unit, slotting unit all have electric
“Automatic zero-returning” and “printing plate cleaned memory”
function.
- Usually adjust the printing roller, slotting knife roller ,and
die-cutting roller to the right printing location, it only need try
to feed 2 sheets with use The “Automatic zero-returning” and
“printing block cleaned memory” function. Decrease the cardboard
waste.
- The printing roller is steel material, after balance correction.
- The surface of the printing roller is grinded, polished and hard
chromium plating.
- The-printing-plate-reel structure is adopted. The pedal switch
control the printing roller run clockwise and anticlockwise, makes
change printing plate easy.
- A complete slot in the printing roller for hung the printing
plate,the size of the slot is 9mm×3mm.
- The down press printing roller.
- The down press printing roller adopt steel tube without gaps, after
balance correction.
- The surface of the down press printing roller is grinded, polished
and hard chromium plating.
- The distance between the printing roller and down press printing
roller is adjusted by electric,with touch screen adjust and show
the adjust date,the adjusting scope is 2-12mm.The printing and down
press printing roller adopt the crosshead connect with the drive
gears,when adjust the distance between the two rollers,the distance
between the two driver gears of the two rollers will not changed.
- The Up and down cardboard feeding roller.
- The up cardboard with four cardboard feed wheel . The up cardboard
feeding roller is steel tube without gaps, been grinded, polished
and hard chromium plating, and after balance correction.
- The down cardboard feeding roller is steel tube without gaps,been
grinded, polished and hard chromium plating,and after balance
correction.
- The distance between the up and down cardboard feeding roller is
adjusted by electric,with touch screen adjust and show the date,the
adjusting scope is 2-12mm.The up and down cardboard feeding roller
adopt the crosshead connect with the drive gears,when adjust the
distance between the two rollers,the distance between the two
driver gears of the two rollers will not changed,it can make the
machine have high printing precision,low noise,and the gears have
longer useful time.
- The adjustive device of the printing roller.
- Adopt satellite gear structure for adjust the clockwise and the
anticlockwise phase of the printing roller.
- The clockwise and the anticlockwise phase of the printing roller is
adjusted by the PLC and electricity,invoter control the adjust
motor,360° could be adjusted while the machine running or stop.
- The horizontal move of the printing roller is adjusted by PLC and
electricity, the adjusting distance is 20mm.
- The “Automatic zero-returning” and “printing plate cleaned memory”
function can make the machine adjust the printing plate to the
right printing location quickly.(The “Automatic zero-returning”
function is for clear the print plate,when you use this
function,the printing roller will automatic run to the best
location which for wash the print plate, after finish washing,
“printing plate cleaned memory” can make the print roller automatic
return to the location before wash the printing plate,it will save
time for adjust the print block again after clear printing plate)
- Inking system adopts pneumatic diaphragm pump inking with the ink
cup to prevent the ink splashing. Steady inking and easy to
maintain.
- Have ink dust gauze,make the ink more clear,improve the printing
effect.
- When the machine stop,the anilox roller and rubber roller could
running independently for transmission ink and prevent the ink dry
out.
- Fix system of the printing unit.
- Self-locking system is used in the distance adjustment of the
feeding roller,down printing press roller,anilox roller and rubber
roller.
- There is a device for fix the “printing clockwise and anticlockwise
phase”,a cylinder is used,when the unit is opened and when the
phase of the printing roller is adjusted,the cylinder will brake
all the units rolling running and keep the original location of the
gears.
- The line creasing device.
1-Creasing wheel roller material is steel tube with out gaps.
2-The surface of the creasing wheel roller is grinded, polished and
hard chromium plating. And after balance corrective.
3-With one layers sets creasing wheels,one set pre creasing wheels,
and one set is creasing wheels,increasing the creasing quality.make
the carton after fold more normative.
4-The distance between the up and down line creasing wheel roller
is adjusted by electric,with touch screen adjust and show the
date,the adjusting scope is 2-12mm.The up and down line creasing
wheel roller adopt the crosshead connect with the drive gears,when
adjust the distance between the two rollers,the distance between
the two driver gears of the two rollers will not changed.
⑵.The slotting knife plate moving device.
1-The slotting knife plate roller is after two times grinded.Be
polished and hard chromium plating. And after balance corrective.
2-The width of the slot is 7mm.
3-The slotting knife is sawtooth, adopt alloy steel material and
after heat treatment and grinded, more hardwearing and sharp-edged.
4-The cardboard cutting knife is adopted alloy material after heat
treatment and grinded, more hardwearing,sharp-edged and high
precise.
5-The slotting knife plate and line creasing wheel and pre creasing
wheels are synchronous move left and right,adjust by
electrically,control by button and colorful touch screen.
6-The four slotting knives are synchronous moving for adjust the
high of the carton box,adjust by electrically,control by button and
colorful touch screen.
7-The distance between the up and down slotting knife plate roller
is adjusted by electric,with touch screen adjust and show the
date,the adjusting scope is 2-12mm.The up and down slotting knife
plate roller adopt the crosshead connect with the drive gears,when
adjust the distance between the two rollers,the distance between
the two driver gears of the two rollers will not changed.
- The clockwise and anticlockwise phase adjustment of the slotting
unit.
- Adopt satellite gear structure for adjust the clockwise and the
anticlockwise phase of the slotting knife plate.
- The clockwise and the anticlockwise phase of the slotting knife
plate is adjusted by the PLC and electricity,with invoter
control,360° could be adjusted while the machine running or stop
running.
- The rubber cushion roller.
- The rubber cushion roller is steel material,the surface is grinded
and hard chromium plating.
- The rubber cushion roller after balance correction.
- Rubber cushion adopt fastening-type excellent rubber.Easy to
install and uninstall. Long service life,can be cutted 4million to
6million times.
- Adopting mechanical control the position move left and right of the
rubber cushion roller.The movement distance is 40mm. This structure
makes the rubber covers equally wear,which can increase the use
time.
- The automatic Pneumatic control Up-down device of the rubber
cushion roller is synchronous with the cardboard feeding
system.(when the cardboard is fed,the rubber cushion roller is go
down and cut the cardboard,when cardboard feeding is stop,the
rubber cushion roller will go up and separated from the die. )
- The unique speed compensation device can make the rubber anvil
roller rolling running with the die,servo motor seperate drive,no
matter how the diameter of the rubber anvil changed,the surface
speed of the rubber cushion is completely controlled by the
die.This could make the shape of the carton sheet absolutely equal
to the die pattern without people operation.
- There is a rubber cushion repair device with the machine,the rubber
cushion can be used again after be repaired.
- The die roller is steel material,the surface is grinded and hard
chromium plating.After balance correction.
⑶. The clockwise and anticlockwise phase adjustment of the
die-cutting unit.
- Adopt satellite gear structure for adjust the clockwise and the
anticlockwise phase of the die roller.
- The clockwise and the anticlockwise phase of the die roller is
adjusted by the PLC and electricity, phase motor is invoter
control,delta brand,360° could be adjusted while the machine
running or stop running.