Active Member
|
[China]
Address: Dongguang Town,Cangzhou City,Hebei Province,China
Contact name:Key Wang
Cangzhou Quanheng Imp&Exp Trading Co.,Ltd. |
|
|
High speed 5 Plys Corrugated Cardboard Production line corrugated carton making corrugator machine
Name:1800mm-150m 5plys corrugated cardboard plants
| Model | Name | Unit/set | Note |
| HB-I | Hydraulic Reel Stand | 5 | Main spindle ¢ 242mm, hyperbolic heavy-duty rocker arm, tooth-type clamp paper head, ventilated disc-type multi-point brake, hydraulic drive up and down, left and right translation, and medium. Guide rail length 6000mm, trolley adopts 10mm middle plate welding. |
| SP-1-600 | Single Pre-heater (floor) | 4 | Roller ¢ 600mm, including pressure vessel certificate. Electric adjustment angle. The wrap angle can adjust the heated area of the paper within 360°. |
| 320B | Single facer | 2 | Corrugated main roll ¢ 320mm, material 48CrMo alloy steel. Independent gearbox, universal joint transmission structure. |
| SP-3-600 | Triplex preheated | 1 | Roller ¢ 600mm, including pressure vessel certificate. Electric adjustment angle. The wrap angle can adjust the heated area of the paper within 360°.. |
| OHB | Double transport bridge | 1 | The main beam 200mm channel steel, independent variable frequency motor driven paper transport, adsorption tension. Electric correction. |
| CGM-F | Double glue machine | 1 | Coated roller diameter 269mm; engraved 25-line pit type net pattern; independent variable frequency motor drive, PLC adjustment glue gap and man-machine interface; glue digital display. |
| HPM | Double facer machine | 1 | Drying department 12 heating plates, 4 pressure plate, pneumatic lifting pressure roller, using dense pressure roller. |
| FTKM | Electric adjustment thin blade machine | 1 | Electric adjustment knife, electric bias, 5 knife 8-wire type, blade made of tungsten alloy steel. |
| NC-S120 | NC Cut off machine | 1 | Full AC servo control, energy storage brake, spiral knife structure, oil-immersed gear drive, 10.4 inch touch screen display. |
| SMA-S | Stacker | 1 | Electrically adjust the cardboard size and pneumatically control the lateral output cardboard. |
| ZQ | Steam system | 1 | Including equipment pipeline valves, steam traps, meters and other steam components, customer-owned heat sources and pipelines. |
| ZJZ | Glue making system | 1 | Pipeline customers bring their own. The glue making device consists of a carrier tank, a main tank, a storage tank, and a glue pump and a back pump. |
Model: WJ1800mm-II five-layer corrugated cardboard production line:
1. Maximum production width of corrugated board: 1800mm
2. Design speed: 150m/min; Economic speed: 120m/min
Note: The paper for production line speed test should meet the following requirements: (The surface temperature of equipment is not lower than 172°C)
* The grade of the base paper must not be lower than Grade B
* The water content of the base paper is approximately: 11% ± 2%
* Face Paper: 100-250g/m2 * Core Paper: 100--250g/m2
* Paper tiles: 100-200g/m2
3, corrugated type combination: A, B, C, E (or selected by the customer)
4, steam requirements:
* Steam volume 2500-3000Kg/Hr * Maximum pressure: 1.2Mpa
* Common pressure: 0.8-1.1Mpa
6, power supply: 380V 50Hz three-phase four-wire system
7, the equipment covers an area: about the specific length based on the foundation foundation map
8, the device out of paper direction: according to the user's plant to determine the drive left or right
9, equipment applicability, available A, B, C grade homemade base paper or imported paper
Customer-owned part
1. Steam heating system: It is recommended to use a 4000Kg/Hr steam boiler with a pressure of 1.25Mpa steam pipe.
2, air compressors, air ducts, glue pipelines.
3, power, wires connected to the operating cabinet and line pipe.
4, water, water pipes, buckets and so on.
5, water, electricity, gas ground plane installation of civil engineering.
6, raw materials for test run, corn (potato) starch, caustic soda for industrial use, borax and other materials.
7, equipment with oil, lubricants, hydraulic oil, grease.
8. Install and adjust personnel's diet and accommodation, and provide installation workers to cooperate with the installation and pay the workers' daily salary.
