Dpack corrugated WJ150-1800 5 Ply Corrugated Cardboard Production Line/150M/Min Speed/1800mm Width corrugation plant

Production Line Main Parameter and Requirement

Model: WJ150-1800 Corrugated Cardboard Production Line

1. Design Speed:150m/min

2. Economic Speed:120-130m/min

3. Working Width:1800mm

4.Production Line Length:About 73 meters (Exact length basis on groundwork drawing)

P.S.The real paper in production speed test should meet the following requirement:

*Reel paper minimum degree : B degree

* Percentage of moisture for real paper 11% ± 1%

*Tissue paper 120~150g/m2

*Liner paper 90~125g/m2

*Flute paper 90~125g/m2

5. Flute profiles:A,C,B,E Flute(Or according to the customers` requirement)

6. Steam requirement:quantity3200－3800Kg/Hr Max pressure 1.6Mpa

Common pressure 1.25MPa

7. Power supply:380V 50Hz Three phase four wire system

8,Total power:About 260kw Common power:About 180 kw

9,Equipment size:80m×12m×4.5m(L×W×H)

10,Equipment flowing direction:According to the user` factory to fix right or left.

Note: Customer’s self-provided parts

1,Steam system:4000Kg/Hr Steam boiler 1 set Pressure:1.25－1.6MPa

Pipes above equipment valve and back gas drain pipes.

2,Air compressor ,pipes and glue pipes.

3,Power, wire link to operation box and its pipes.

4,Water source, water feeding pipes and buckets.

5. Water, electricity and air installation on groundwork.

6. Testing material: real paper, corn (Tuberous crop) starch, sodium hydroxide for industry and borax, etc.

7. Motor oil, lube, hydraulic oil and grease lubricant and high temperature grease lubricant.

8. Board and lodging for installation and commissioning personnel and arrange workers to cooperate installation.

Quality Guarantee

1. Quality Guarantee period: one year after final acceptance

2. Within the period of quality guarantee, the Seller is obliged to supply technical assistance to the Buyer to ensure normal production. Within the period of quality guarantee, in case of any defects or malfunctions, which have been proven to be caused by Seller’s poor materials, designing errors, and poor fabrication and assembly technology, upon receipt of the Buyer’s information in writing, the Seller will send its technicians immediately.

3. Within the period of quality guarantee, in case of any defects or malfunctions, which have been proven to be caused by the Buyer using improper material, mis-operating and maintenance, upon receipt of the Buyer’s information in writing, the Seller will send its technicians immediately. The international air tickets (if necessary), local transportation and accommodation will be borne by the buyer.