Home Companies Hebei Dongguang Packing Machinery Co.,Ltd

Dpack corrugated WJ220-2200 5 Ply Corrugated Cardboard Production Line

Hebei Dongguang Packing Machinery Co.,Ltd
Active Member

Contact Us

[China] country

Address: Address:NO.252 Guanzhou Road, Dongguang County , Hebei Province ,China

Contact name:

Inquir Now

Hebei Dongguang Packing Machinery Co.,Ltd

Dpack corrugated WJ220-2200 5 Ply Corrugated Cardboard Production Line

Country/Region china
City & Province hebei
InquireNow

Product Details

Model: WJ220-2200 5Layer Corrugated Carton Production Line

Design speed220m/min
Normal work speed180-200m/min
Manufacture width2200mm
Production Line LengthAbout 110meters (Exact length basis on groundwork drawing)
Note

The roll paper which is used to test the production speed should meet following requirements:

*Grade: Min. B * Moisture content: 11% ± 1%

*Face paper: 100~150g/m2 * Liner paper: 100~150g/m2

*Corrugated paper: 105- 180g/m2

Flute profilesA,B,C,E flute(as per clients request)
Steam requirements

Steam quantity: 3200-3800Kg/Hr Max. pressure: 1.6Mpa

Normal pressure: 0.8-1.3MPa

Voltage380V 50Hz three-phase, or four phase
Equipment DirectionLeft or Right transmission will be according to client`s requirements
equipment total powerabout 500 kW, equipment commonly used power: 340 kw

 

Remarks: Buyer supply part:

Air compressor and glue pipeline

Main power, electric wire from operate box to main power.

Water supply, pipeline and barrel.

Water, electric and gas, main groundsill foundation.

Test machine use Raw materials ( paper roll, corn starch, caustic soda, sodium borax) to test machinery

Machine use oil, lubricate oil and high temperature lubricate oil.

Installing engineer’s food, hotel and supply enough workers to help installing and test machine.

Boiler 4T

Quality Guarantee

1. Quality Guarantee period: one year after final acceptance

2. Within the period of quality guarantee, the Seller is obliged to supply technical assistance to the Buyer to ensure normal production. Within the period of quality guarantee, in case of any defects or malfunctions, which have been proven to be caused by Seller’s poor materials, designing errors, and poor fabrication and assembly technology, upon receipt of the Buyer’s information in writing, the Seller will send its technicians immediately.

3. Within the period of quality guarantee, in case of any defects or malfunctions, which have been proven to be caused by the Buyer using improper material, mis-operating and maintenance, upon receipt of the Buyer’s information in writing, the Seller will send its technicians immediately. The international air tickets (if necessary), local transportation and accommodation will be borne by the buyer.

 

WJ220-2200-5LayerCorrugated Carton Production Line Price List

Design speed: 220m/minNormal work speed: 180-200m/min
No.Machine nameQtyRemarks
1Mill roll stand5RS-1500-2200 type, Base paper lifting, clamping, loosening, left shift, right shift are hydraulic control, multiple brakes, sawtooth chuck, the maximum paper width is 2250mm, the maximum paper diameter 1500mm.Hydraulic valve made in Tianyuan .
2Railing and track10

8m railing with pulley

16# channel steel

3Pre-heater2MH-1000T-2200 type, preheating cylinder diameter of 900mm, adjust the electric preheating area, water valve for the Shanghai brand, with safety protection cover, Electric autobiography
4Cassette Single facer2Corrugated roller tungsten carbide B,C flute, corrugated roller upper diameter 408mm and lower diameter is 325mm, according to the speed automatic control glue thickness, Touch screen and PLC use European brand
 Spare corrugated roller system1_E flute tunsteng carbide roller 408mm
 Battery pulley1 
5Pre-conditioner2MH-1000T-2200 type, preheating cylinder diameter of 900mm, adjust the electric preheating area, water valve for the Shanghai brand, with safety protection cover,.Electric autobiography
6Double bridge conveyor1ST-2200 double deck bridge. Two sets of paper pulling parts, electric deviation correction. According to the speed adjustment of single machine, keep synchronization.
7Three pre-heater1MH-1000T-2200 type, preheating cylinder diameter of 900mm, adjust the electric preheating area, water valve for the Shanghai brand, with safety protection cover,Electric autobiography
8Duplex Gluing machine1GA-318D-2200 type of 318mm, variable frequency motor, display quantity of cement, the main bearings imported products.
9Double facer1DF-745-2200 type, Large worm gear box, automatic deviation correction, frequency conversion motor, wallboard for casting, drive roller hanging glue, 600mm * 20 block heating plate, With 12pcs press plate.
10Main drive1

Diameter 745mm

Rubber roller

Independent reducer box, gimbal driving.

11Computerized Slitter Scorer2SS-250P-2200, For a single time less than 8 seconds, 6 knife 10 line, zero line
12Double knives NC cutter1NC-250N-2200, Paper length is 9999mm. The computer can store multiple orders, the man-machine interface is separated, the display shows production information, and the computer controls the automatic change list without stopping the machine. Paper cutting accuracy + 1mm. Cutter shaft of 228mm spiral knife in Taiwan
13Paper holder1Pneumatic
14Automatic Double Basket Down Stacker1

CS-220P-2200,Count accurately, change the stack automatically and change bills.

Upper is used for staking in basket,lower is for transverse output. Max stack length: The upper is 3500mm,The lower is 3000mm

Max stack height: 1600mm(stack height should not be higher 3 times of paperboard height)

15Glue making system1

main pot 1 set, carrier pot 1 set, and storage pot 2set, glue station pump, single facer glue pump and gluing machine glue pump.Total 7pumps

Circle supply glue, pipeline provided by customer

16Pneumatic system1

Separator and 1 set air storage Jar and air pump.

Pipes provided by customer.

17Electric system1

Electrical adopt ABB,Schneider brand

including wires from switch board to main motor.

18Steam system1pipes above valves provided by customers.
19Splicer5 
20Tension deviation1 
Optional part
1Auto glue making machine1 

All quotations remarks:

INSTALLATION:

*Delivery time :150 days after deposit

*Standard installation Time: 40 days
*Preparation from the Buyer, before the arrival of our technician
*According to foundation drawing, the space for machines should be read
*According to order information and installation requirement, prepare necessary materials

*The buyer should bearing the cost of air ticket,hotel and food

 

Note:

*Installation and debugging

*Of number: 6 person

 

Hot Products

Technical parameter The application of line width 1800mm Dimension 6000mm×300mm×170mm(length x width ...
Machine Description: Double facer is corrugated paper enter into hot plants heating and molding ...
Customizable double Layers,three Layers ,five Layers ,seven layers 2500mm corrugated board ...
WJ200-2200-5ply corrugated cardboard production line No. Machine Name QTY Remarks 1 Hydraulic Mill ...
Model: WJ220-2200 5Layer Corrugated Carton Production Line Design speed 220m/min Normal work speed ...
2/3/5/7 ply 1400mm Corrugated cardboard production line with economical or high speed 1400mm ...