Dpack corrugated Shaftless Hydraulic Mill Roll Stand , Oil - Pressure Raw Paper Holder carton packaging production line

Machine overview:

The machine is designed to hold the base paper in the air and supply the base paper for production.

* Two rolls of paper can be loaded at the same time to realize non-stop paper change.

* The whole machine is operated by 6-cylinder full hydraulic control, and the hydraulic control clamping arm is raised and lowered.

Clamping open, left and right lateral movement:

* The clamping wall adopts the curve structure of cast iron, which is firm and stable.

* Configure the oil pressure system.(Taiwan brand)

* Tension control: multi-point pneumatic brake, good braking performance, fast heat dissipation,

And the air pressure valve, pressure regulating valve and pressure gauge.

* The chuck adopts conical top design, which is not easy to damage the paper core, and the base paper is more thoroughly used

Specifications:

* The width of the paper is 2500mm.

* Maximum clamp base paper diameter: Ø 1500 mm.

* Minimum original paper diameter: 350 mm Ø.

The main function

* Prevent damage to the paper core oil pressure system design clamping and descending using low pressure control, other high pressure.

Independent operation button on the operating side and convenient operation; four-position switch is installed on the operating side arm.

* Electrical safety control, paper can be up to the working position, down to the lowest, no paper to the highest, down to the lowest.
 

While working, when there is paper, the arm button on the working position can only be controlled from left to right and cannot be relaxed. The panel can only be clamped and cannot be relaxed. When working, the arm button can be tightened and relaxed.

When the paper roll is loaded on the swing arm, it can only be shifted, and the operation of releasing the paper roll is prohibited.

Brand

NSK

Clamp arm