|
[China]
Trade Verify
Address: Rongsheng Building, Canal District, Cangzhou City, Hebei Province, China
Contact name:Linda Liu
Hebei Jinguang Packing Machine CO.,LTD |
|
Verified Suppliers
|
|
|
Automatic 5 Ply Corrugated Board Production Line White Color Machine
Basic structure:
5, the edge machine: 1 set
The opposite side machine consists of a 4-layer frame, a paper
guide roller with a 104mm chrome-plated roller, a center swing
roller diameter of 86mm, a pair of side systems using a hydraulic
oil and gas station, and a transmission device.
The main function of the edge machine is: automatic control of the
edge, alignment, and edge error: ± 1mm.
6, four online: 1 set
The four wires are composed of four hot rollers with a diameter of
400 mm and a frame, a paper guide roller, a heating device, a
distance device, a transmission device and the like.
The heating device is temporarily designed as an electric heating
device.
The guide roller has a diameter of 86 mm.
The surface of the heated roll is ground and hard chrome plated.
The temperature of the surface of the heat roller is made uniform.
The water content of the base paper before entering the glue
applicator is basically the same.
7. Gluing machine: 1 set
The coating machine has three sets of glue coating devices, which
are driven separately. The transmission motor is 3 sets of 2.2KW,
and the frequency conversion motor is regulated. The specific
structure is that the rubberizing roller has a diameter of 215 mm,
the surface is ground and processed, and the mesh is pressed, which
is advantageous for uniformly feeding the rubber to the rubberizing
roller to make the rubber coating uniform.
The rubberizing roller and the rubberizing roller are provided with
an adjusting mechanism to effectively control the amount of glue,
so that the coating amount of the machine is more uniform and
reliable. The platen shaft is provided with a pneumatic adjustment
device.
The other paper guide rollers are all plated with hard chrome to
prevent corrosion of the rubber surface.
8, bonding machine: 1
The machine is composed of upper and lower rubber rollers, pressing
device, transmission device, frame device and the like.
The machine is a device in which the glued paper sheets are bonded
together, and the pressure can be appropriately adjusted according
to the type of the paper and the relevant conditions.
The diameter of the upper and lower rubber rolls is set to 400 mm,
and the wall thickness of the roll body is 20 mm, which prevents
deformation of the roll body during pressurization.
9, dryer: 1 set
The dryer is provided with 5 meters and 5 sets of electric heating
and drying devices. The drying roller has a diameter of 240 mm, and
the surface is plated with hard chrome and pneumatically
pressurized.
Parameter
| Design speed:100m/min | Normal work speed:60-80m/min | ||||
| No. | Machine name | Qty | Remarks | ||
| 1 | Mill roll stand | 5 | Electric swing | ||
| 2 | Railing and tracks | 10 | |||
| 3 | Single facer | 2 | Corrugating roller ￠280mm, electric adjust gluing width, pneumatic control | ||
| 4 | Pre-heater | 2 | ￠600mm, electric adjust wrapping angle | ||
| 5 | Pre-conditioner | 2 | ￠600mm electric adjust wrapping angle | ||
| 6 | Bridge conveyer | 1 | Adsorption type, electric deviation-correcting | ||
| 7 | Triplex pre-heater | 1 | ￠600mm electric adjust wrapping angle | ||
| 8 | Gluing machine | 1 | Pneumatic adjust pressing roller | ||
| 9 | Double facer | 1 | Heating plants: 520mm×16, with cooling section | ||
| 10 | Slitter scorer | 1 | 5 blades with 8 scorers | ||
| 11 | NC cutoff | 1 | Helical knives Blade made in Taiwan | ||
| 12 | Cardboard feeing machine | 1 | |||
| 13 | Main drive | 1 | |||
| 14 | Glue making system | 1 | Automatic circle glue, pipeline provided by buyer | ||
| 15 | Electric system | 1 | |||
| 16 | Steam system | 1 | Pipeline on valves provided by buyer | ||
| 17 | Pneumatic system | 1 | |||
