Active Member
|
[China]
Address: Economic Development Zone of Dongguang, Cangzhou Province, China
Contact name:Anna Tang
CHINA YIKE GROUP CO.,LTD |
|
|
main technical parameters and requirements in production line:
1 | Effective width | 1800mm | 2 | Design produce speed | 150m/min | |||
3 | Three layer work speed | 100-140m/min | 4 | Five layer work speed | 90-130m/min | |||
5 | Seven layer work speed | ------------------- | 6 | The highest change single speed | 100m/min | |||
7 | Longitudinal separation accuracy | ±1mm | 8 | Cross-cutting precision | ±1mm | |||
note | Speed the above targets required to achieve:effective width1800mm,Comply with the following standards and ensure the paper's equipment condition 175 ℃ heating surface temperature. | |||||||
| Top paper index | 100g/㎡--180g/㎡ Ring crush index(N.m/g)≥8 (Water containing8-10%) | ||||||
| Core paper index | 80g/㎡--160g/㎡ Ring crush index(N.m/g)≥5.5 (Water containing8-10%) | ||||||
| In paper index | 90g/㎡--160g/㎡ Ring crush index(N.m/g)≥6 (Water containing8-10%) | ||||||
9 | Flute combination |
| ||||||
10 | Steam requirement | The maximum pressure 16kg/cm2 | Common pressure10-12kg/cm2 | use4000kg/Hr | ||||
11 | Electricity demand | AC380V 50Hz 3PH | Total power≈220KW | Running Power≈150KW | ||||
12 | Compressed air | The maximum pressure 9kg/cm2 | Common pressure4-8kg/cm2 | use1m3/min | ||||
Customer-owned section
|
1, steam heating system:proposal with 4000Kg / Hr of a steam boiler pressure:1.25Mpa steam pipeline.
|
2, air compressed machine,air pipeline,glue conveying pipe. |
3, power supply,wires connected to the operation panel and line pipe. |
4, water sources,water pipelines,buckets and so on. |
5, Water, electricity, gas flush mounting civil foundation. |
ZJ-V5B hydraulic shaftless mill roll stand
Hydraulic system parameters:
1.Work pressure(Mpa):16---18Mpa
2.lifting hydraulic cylinder:￠100×440mm
3.Clamping hydraulic cylinder:￠63×1300m
4.hydraulic station motor power:3KW --380V -- 50Hz
5.solenoid valve voltage:220V 50 Hz
Mainly purchased parts, raw materials and origin:
Name of main parts | Brands or place of origin | material |
Main shaft | Day steel production | diameter242mm |
Swing arm | Production by own | Resin sand gray ironHT200 |
wallboard | Jigang prduction | Q235AWelding parts |
bearing | HRB,ZWZ,LYC |
|
Toothed chuck | Zhejiang xusheng | 3,4inch shared |
Main electrical appliance | France Schneider |
|
button | CHINT NP2series |
|
Air switch | French Schneider |
|
Pneumatic components | Zhejiang Sonor CSM |
|
Hydraulic station | Shandong zaozhuang |
|
Brake pump | zhejiang |
|
TQ-A-2 conveyor bridge
structural feature:
★Vacuum adsorption tension control,5-inch suction tube,add regulator valve,air volume stepless adjustable air volume.
★Electric corrective devices II sets,correction baffle double guide column positioning,Screw Driver,positioning fast and accurate , smooth running.
Power motors and electrical parameters:
1,single facer corrugated paper lift motor:4KW (frequency) 380V 50Hz Continuous (S1) working standard
2,Bridge adsorption fan: 3KW 380V 50Hz Continuous (S1) working standard
3,The cardboard wide motor: 250W 380V 50Hz short(S2)working standard
