Cardboard Flexo Printer Slotter Machine

Cardboard Flexo Printer Slotter Machine

Performance of the main mechanisms:

1. Paper-feeding:Chain,paper pushing feeding.

2. Open and closing of the unit adopts electrical walking and pneumatic locking(with overload protection function).

3. Paper-feeding roller :The upper axle adopts ginning paper-feeding wheel while the lower axle adopts steel ginning roller.The surface hard chromium-plating guarantees the smooth feeding of the paperboard and does not damage the corrugated cap.

4. Printing roller:You can adopt the advanced,convenient and practical hanging plate with hooked slots(Optional).Loading ans unloading the plate can be independently controlled by the pedal switch.The phase adjusting adopts non-stop-working,360°electrical and numerical adjustment,input the data as per the error,Automatically adjust.

5. The paper-feeding of the drive part of the printing part adopts cross sliding drive.The gears of the print pressing roller and the paper-catching roller adopt the planetary rocker-plate drive device.The gears are normally meshed from beginning to end while the space between the print pressing and the paper catching is adjusted,which does not enlarge the space between the gear-top and gear-side,make the color process(esp.the multi-color process)more accurate and lower the wear between the gears to the minimum.

6. Main gear and roller adopt keyless connection,keep always stable transmission,and high running precision.

7. Ink circulating system:

1)The anilox roller adopts the steel material,180# can be chosed accord requirment,after balance and hard chrome plating.

2)The rubber roller is made up of natural oil proof,acid proof and alkali proof rubber.

3)Pneumatic diaphragm pump inking,automatic circulating.Automatic cleaning after adding water.

4)Stop working to distribute ink.Stop working and the work of the ink circulating system for a short time.Cleaning-free to guarantee the quality of the printed things and make the inking color showing no difference.

5)Pneumatic control of the anilox and rubber rollers of the ink circulating system.Quick lifting can print more tiny script,fine pattern or color process.It can make the printed matters clear,full and round.

8. Slotting part(Optional)

1)he slotting part can electrically adjust the phase in 360°,no downtime can be adjusted.

2)Hand adjust the height of the carton.Four knives are synchronous.

3)Long and wide adjusting.Loading and unloading the knife disk,Upper and lower creasing.Paper-kicking knife.Creasing shaft.The pointer of the scale can be hand and combinedly moved to save time.

9. Pneumatic and combined control of the whole machine which has the function of counting,alarming and operating at the back of the machine.

 Technical parameter: