|
[China]
Trade Verify
Address: Zhounan Road,Wanshi Town,Yixing City,Wuxi,Jiangsu Province
Contact name:Yaling
Wuxi Xianglong Plastic Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Its advantages are as follows:1. Long life, good heat exchange performance, cooling. The raw material is made of PVC polyethylene sheet, and its service life is not more than 5 years.
Packing for film type, convex fine ripple water contact surface is the largest. There is a redistribution process of hot water between the packing layers.2. Good hydrophilicity, small ventilation resistance surface rough, smooth packing hydrophilicity, water absorption is less than 0.015%, so that more water to form a film, and not splash, so that water and air fully contact at the same time, so that water and air in the flow of surface disturbance. After packing assembly, the air inlet surface is a honeycomb deflector, which has good air distribution effect and improves and stabilizes the heat exchange intensity of water and air.
The inlet tilt Angle is 30°, which effectively reduces the loss of drift water. A water collector designed by impact separation method is arranged at the end of the packing, so that the loss of drift water is effectively controlled within 1/100,000.3, easy to install, easy to clean, convenient transportationThe company's heat dissipation fillers have non-bonding and hanging type, also have stacking type, easy to install, easy to clean, and successfully solve the adhesive fillers due to dust scaling, weight and deformation, and deformation of scaling serious, difficult to clean the problem. The flame retardant performance of the filler is good, and the flame retardant oxygen index is more than 30.4.
Specifications:| Tech Date | |
| Sheet Width(mm) | 1220mm |
| Sheet Length | 206MM*N(N=4,5,6,7,8,9,10,11,12......)/customized |
| Thickness | 0.32-0.6mm/customized |
| Sheet Spacing | 19-20mm |
| Color | grey/white/black |
| Material | PP/PVC/CPVC |
This company produces the main models are divided into wet cooling tower PVC packing: circular counterflow cooling tower packing, square counterflow cooling tower packing, a square cross-flow cooling tower packing, industrial cooling tower packing, closed cooling tower packing, evaporative cooling tower packing, air conditioning cooling tower cooling film, PVC shower water sheet, staggered, for special-shaped pieces of visual field surrounding the tower wall Layout, according to the actual size of cutting, installation.
Cooling tower packing cleaning method:
1. Manual cleaning of the slag falling off in the cooling tower;
2. Rinse the packing repeatedly with a high-pressure water gun to remove the sludge and scale under cleaning;
3. Dissolve the TNB descaling agent with hot water at about 50°C, and then use the flushing pump to rinse the filler repeatedly until the scale is rinsed off (if the filler has a long service life, causing aging and collapse, it is recommended to replace the filler), and add algaecide at the same time. Completely kill biological algae and;
4. After confirming that all parts of the system are cleaned, drain the sewage;
5. Rinse the packing and the inside and outside of the tower body with clean water;
6. Restore all parts of the system, replenish water and use it;
7. After all recovery, please check and accept the management personnel of Party A;
8. Evacuate Party B's belongings and clean the site;
