Active Member
|
[China]
Address: No. 30 Hongkong Middle Road, Qingdao City, China
Contact name:Jack Liu
HEBEI QINYI CONVEYING EQUIPMENT CO.,LTD |
|
|
Corrosion Resistance Self Aligning Carrying Idler Belt Conveyor 45 Degree
Wholesale Belt Conveyor Carrying Idler 45° for Coal Mine
Carrying Idler or Roller is an Idler upon which load carrying portion of Belting is supported. For each and every size of Belt requires different size of Idler.
As the name suggest, these idlers are used to carry Belt with Bulky material. This bulky material can be Limestone, Clinker etc. These idlers are designed and manufactured in such a way to move the belt smoothly. These Idlers can comprise upto 3 rollers to 5 rollers.
Idlers are vital to the conveying process. They support the belt and conveyed material along its full length preventing it from stretching, sagging and eventually failing. Conveyor idlers are often required to operate in harsh environments such as dirty, dusty, high humidity, and drastically high or low temperatures.
Troughing belt conveyor steel carrying idlers rollers having seize
resistant bearings with frames as per drawings
Impact rollers and conveyors Return idlers for belt conveyor-system
used in docks, dams-infrastructure velopers
Head Drum pulleys for materials handling equipment conveyor-belts
drive
Product raw material
1. Pipe: High precision ERW special pipe with small out of
roundness. Material Q235 equal to Europe S235JR
2. Shaft: High precision cold-drawn round bar, Material 45# equal
to DIN C45.
3. Bearing: Deep groove ball bearing with clearance C3. Double
Seal, Quality Grade P5Z3
4. Bearing House: Cold drawn steel plate, material 08AL equal to
DIN ST12/14
5. Inner Seal: Lip type seal, Material Nylon.
6. Labyrinth Seal: Main Seal System, Material is Nylon.
7. Lubricating Grease: #2 Long lasting lubricating grease, working
condition -20°c to 120°c
8. Surface Treatment: Electrostatic Powder Coating
Product name | Conveyor roller, conveyor idler |
Lift time | 50000 hours |
Production capacity | As usual 600 pieces/day |
Diameter & Length | Dia: 76-219mm, Len: 190-3500mm |
Tube | Q235 carbon steel |
Shaft | 45# Cold drawing round steel, Dia: 20mm, 30mm , 35mm, 40mm |
Bearing | Single and double row deep groove ball bearing 2RZ and 2Z with C3
clearance |
Bearing No. | 6204, 6205, 6305, 6306, 6307, 6308, 6309, 6310 |
Seals | Grease retaining inner seal with multi-stage labyrinth and
retention cap with outboard rubbing flinger seal |
Welding | Mixed gas shielded arc welding end |
Finish | Painting/rubber/steel screw/galvanized |
Standard | ISO/BS/JIS/DIN/CEMA/Australia |
Material feature | Water, wear, dust and corrosion resistance |
Certifications | ISO9001/BV/SGS |
Application | Harbor & port, coal, mining, quarry, power industry, cement
plant etc |
Feature of 45 degree carrying idler
1) return conveyor idler roller - used for transporting whole pieces material & supporting returning belt
2) carrying conveyor idler roller - used for transporting bulk materials
3) impact conveyor idler roller - reduce the impact of blanking on conveyor belt
4) guide/friction/tapered/crown face conveyor idler roller - adjust the conveyor belt deviation
5) rubber sprial conveyor idler roller - to prevent corrosion, sticky rollers, belt, tear
6) conveyor idler roller with rubber discs/steel sprial conveyor roller - clear conveyor belt
7) suspension conveyor idler roller - auto-adjusting, slow the impact of bulk materials, as well as to facilitate disassembly and assembly
