8.25R16 Sinotruck Howo 10 Cbm Water Sprinkler Truck Euro 3 Engine

What is Sinotruck Howo Water sprinkler Tanker Truck?

Sinotruck Howo Water sprinkler Tanker Truck are also called sprinklers, multifunctional sprinklers, landscaping sprinklers, water tankers, and water tankers.

The sprinkler is suitable for washing all kinds of road surfaces, trees, green belts, lawn greening, roads, factory and mining enterprise construction, and high-altitude buildings washing. It has the functions of water spraying, dust pressure, high and low spraying, pesticide spraying, guardrail flushing, etc. It also has the functions of water transportation, drainage, and emergency fire fighting.

Sinotruck Howo 5-10 CBM Water Sprinkler Tanker Truck Euro 3 Engine

Sinotruck Howo 5-10 CBM Water Sprinkler Tanker Truck Euro 3 Engine, also known as multifunctional greening sprinkler. It is used in urban roads, large factories, military units, gardens and other units to clean road surfaces, sanitation, dust prevention, watering, spraying pesticides, etc. to achieve the effect of beautifying the environment.

At the same time, it can be used for temporary emergency fire sprinkling, and each sprinkler is equipped with a special fire fighting interface.

The engine drives the gearbox, and the power take-off installed on the gearbox drives the sprinkler pump. The sprinkler pump generates the main power to spray the liquid inside the tank through the pipe network. Self-priming height: ≤7m, sprinkler width: ≥20m, maximum range: ≥28m; it can be adjusted into a column, the range is ≥28m; it can also be adjusted into a fog, the range is ≥5m.

The front sprays and the rear sprays. The front is equipped with duck-shaped nozzles or round-headed punch nozzles, and the back is equipped with cylindrical sprinkler nozzles or shower nozzles. There is a working platform at the rear, equipped with high-pressure water cannons. 8 nozzles (optional) can also be installed at the rear. Water sprayers are generally used to wash the streets.

Sinotruck Howo 5-10 CBM Water Sprinkler Tanker Truck Euro 3 Engine Capacity As Follows:

3-8 cubic sprinkler
10-12 cubic sprinkler
13-15 cubic sprinkler
18-20 cubic sprinkler
Sprinklers above 20 cubic meters

Sinotruck Howo 5-10 CBM Water Sprinkler Tanker Truck Euro 3 Engine Operation

Function Description
Folding suction operation

(1) The sprinkler should be as close to the operating point as possible and parked.

(2) Open the side door of the platform box, take out the water absorption hose, and make it swing backward without bending.

(3). Pump the suction hose as deep as possible into the water to ensure that the end of the pipe is always below 300mm from the liquid level during the operation.

(4). Push the handle of the four-way valve to be perpendicular to the ground.

(5). Put the transmission into neutral, then start the engine, disconnect the clutch, pull the power take-off switch backwards to engage the gear and take the power, and the pump starts to run.

(6) The operator can pass through the observation mirror on the upper part of the rear head. When the liquid level reaches the middle of the observation mirror, the driver should be notified, and the colleague should quickly pull the water suction hose away from the water surface or close the four-way valve.

(7) After putting away the hose, put it back into the platform box and close the side door.

(8) Drive the sprinkler away from the pumping location

Folding spraying operation

(1) Pull the rear handle of the four-way valve parallel to the ground, open the ball valve you want to spray (front flush, rear spray, side spray, shower), then start the engine, put the transmission in gear, and set the power take-off Pull the switch backward to shift gears and take power, then disconnect the clutch, the pump starts to run, and starts to sprinkle

(2) After the water in the tank is sprinkled, the driver should promptly push the power take-off handle forward to release the gear and stop the sprinkler pump.