Active Member
|
[China]
Address: No. 3999 LiuJiang Road, Liushi, Yueqing, Wenzhou, Zhejiang, China
Contact name:Sunny Zhang
WENZHOU SANTUO ELECTRICAL CO.,LTD. |
|
|
STH8 series Household Contactor 1P,2P,3P,4P up 16,25,32,40,63,100A 18mm width PA66 plastic cover 85%siliver red copper
STH8 Modular Contactor (also known as analog contactors and architectural contactors) are mainly used in power systems with AC 50Hz/60Hz, rated working voltage up to 400V and rated working current up to 100A. They are used as remote switches and control circuits in AC-1 and AC-7a (non-inductive or low-inductive loads, resistance furnaces, household appliances and similar low-inductive loads). It can also be used to control the load of household motor. Modular Contactors cant't be used in break short-circuit currents, so appropriate short-circuit protective appliances (such as small circuit breakers) should be selected when using them. It meets the standard IEC 61095. BCH8 contactor can expand auxiliary control, protection and indication functions. STH8 Modular Contactor is a kind of control device used for long distance connection and disconnection of inductionless or low inductive load, resistance furnace, household appliances and similar low inductive load, household motor, etc. BCH8 Modular Contactor are mainly used in homes, hotels, apartments, office buildings, public buildings, shopping malls, gymnasiums and other places to achieve automatic control functions.
(1) The analog and digital control device has novel structure and compact volume.
(2) Installation orbiting, dimension modularization, safe use, can be combined with small circuit breakers installed in the control lighting box.
(3)The use of high-quality insulation materials greatly improves the safety.
(4) Beautiful appearance with working status indicator window.
(5)No noise, suitable for hotels, hospitals and other places.
| Module Number | STH8-100 |
| Circuit Rating Voltage | 230V |
| Circuit Rating Current | 100A |
| Pole | 1P,2P,3P,4P |
| Contact | 1NO+1NC; 2NO+2NC ... |
| Frequency | 50HZ/60HZ |
Normal working and installation conditions
1.Ambient temperature: -5℃ to +40℃, the average temperature no more than+35℃ in 24 hours.
2. Altitude: no more than 2,000m.
3.Atmospheric condition: the relative humidity of the installation place should be no more than 50% when the manximum temperature is +40℃; if under a lower temperature, a higher relative humidity is allowed. The monthly average minimun temperature in the wettest month should not exceed +25℃ and the monthly average maximum relative humidity of this month no more than 90%.Besides,the dew on the surface of products causes by temperature change should be taken into consideration.
4. Class of pollution : class 2.
5. Installation condition: class II
6. Installation mode: use the installation orbit of “Top Cap” section TH35- 7.5 mould.
Structure
This kind of contactor belongs to the terminal product which
holding the following
characteristics: normalization of installation, modularization of dimension, artistic
appearance and safe for use, In addition, it adopts the equipment of direct-acting configuration.
FAQ
Q 1. what's the payment term?
A. We accept TT,30% deposit and 70% balance agaisnt copy of BL
Q 2. how's the delivery time ?
A. usually it will take about 25 days for production
Q 3. tell me the standard of package?
A. Normally are cartons, but also we can pack it according to your
requirement.
Q 4.Would you accept to use our logo ?
A.If you have good quantity,it absolute no problem to do OEM.
Q5. Can i take some samples?
A. Yes, we support to take samples before place the order.
Just feel free to contact with us if you have any requirements.
Q6. Are you original Factory?
A. Yes, we have our own factory .
Q7. How can you make sure the quality of the products?
A. We will accord to international quality standards to
inspect every item before leaving our factory.
