Active Member
|
[China]
Address: No. 3999 LiuJiang Road, Liushi, Yueqing, Wenzhou, Zhejiang, China
Contact name:Sunny Zhang
WENZHOU SANTUO ELECTRICAL CO.,LTD. |
|
|
STPN05-40 residual current circuit breaker with overload
current protection is in conformity with the standards of
IEC61009.also comply with Australia ESV new standard ; It can cut
off the fault circuit immediately on the occasion of shock hazard
or earth leakage of trunkline.Thus it is suitable to avoid the
shock hazard and fire caused by earth leakage.It can be used in
circuits up to single phase 240V,three phase 415V,50 or 60Hz.
Product Over View:
1. Provide protection against earth fault/leakage current and function of isolation
2. High short-circuit current withstand capacity
3. Applicable to terminal and pin/fork type busbar connection
4. Equipped with finger protected connection terminals
5. Automatically disconnect the circuit when earth fault/leakage current occurs and exceeds the rated sensitivity
6. Independent of power supply and line voltage, and free from external interference, voltage fluctuation.
| Sandard | IEC/EN61009 | ||
| Electrical features | Type(wave form of the earth leakage sensed) | electronic type | |
| Rated current In | A | A,AC | |
| Poles | P | 1P+N | |
| Rated voltage | V | AC 230V | |
| Rated Current : | 10,16,20,25,32,40A | ||
| Rated sensitivity I△n | A | 0.01,0.03,0.1,0.3,0.5 | |
| Insulation voltage Ui | V | 500 | |
| Rated residual making and breaking capacity I△m | A | 630 | |
| Short-circuit current I△c | A | 4500 | |
| SCPD fuse | A |
| |
| Rated frequency | Hz | 50/60 | |
| Pollution degree | 2 | ||
| Mechanical features | Electrical life | t | 4000 |
| Mechanical life | t | 10000 | |
| Protection degree | IP20 | ||
| Ambient temperature (with daily average ≤35℃) | ℃ | -25~+40 | |
| Storage temperature | ℃ | -25~+70 | |
| Installation | Terminal connection type | Cable/U-type busbar/pin-type busbar | |
| Terminal size top/bottom for cable | mm2 | 25 | |
| AWG | 18-3 | ||
| Terminal size top/bottom for busbar | mm2 | 25 | |
| AWG | 18-3 | ||
| Tightening torque | N*m | 2.5 | |
| In-lbs | 22 | ||
| Mounting | On DIN rail EN 60715(35mm)by means of fast clip device | ||
| Connection | From top and bottom | ||
Our Advantages
We have competitively price,
we can provide after sale service,
our products are of high quality, they are durable and have long life
