Iron Tank Type High Voltage Test Reactor , Variable Inductance
Resonant Testing Equipment , Cable Testing
I. Application :
CHX(L,TX) series large capacity& iron tank-type induction
regulation resonance test system is mainly used for AC voltage
withstand or of ex-factory AC voltage withstand test to HV XLPE
cable or other power equipment of 110KV~500KV class, which
Significant advantages is proper for very long continuous working
.This products from Fanke has been subscribed by State Grid
Corporation of China Wuhan High Voltage Research Institute(as per.
The above picture). The specification is 350KV,35A . they are used
for long period stimulating voltage withstand test of super high
voltage cables(type test for EHV XLPE).
Note : Iron Tank Type High Voltage Test Reactor with variable
frequency resonance also can be mady by order .
HV output bushing on the test reactor can be designed to be
horizontal side .
II. Applicable objects
- Field AC voltage withstand and factory AC voltage withstand test of
high voltage power cable of 110KV—500KV.
III. Key features
- Iron box style structure, good heat dispersion, being able to
operating for long time.
- The input power supply capacitor is only 1/Q that of output.
- Weight as1/5~10 of conventional power frequency test transformer
- No transient overvoltage when breakdown the tester
- Wide applicable range, good flexibility of application, large
capacitor range of the
- tester.
- When breakdown the tested object, the resonant condition is
damaged, shortcircuit current will be reduced to the minimum
automatically, little short-circuit current past on fault point
- Equipped with intelligent measurement and control system, long term
of
- intelligently and automatically detect, dispense with staff on
duty.
- Could be designed as vehicle mounted and equipped with special test
vehicle.
IV. General Technical data:
- Mode of system test: Series resonant with variable frequency or
variable inductance
- Number of HV test reactor: OEM
- Rated output capacity: OEM
- Rated output Voltage: max. 400KV/piece
- Rated output current: max.25A /piece
- Reg. Freq range : 20Hz-300Hz
- Output Resonance voltage waveform: sine wave
- Insulation level: Under 1.1 times and keeping 1min, normal
- Duty cycle : OEM or 60mins on under rated current working condition
;
- Quality factor of test set itself: Q≥60
- Temperature rise: Less than 65K under rated current working
60mints;
- Noise level: No more than 70B
- Reactor Structure: oil immersed type, epoxy tube cylinder type;
Note : special requirement can be made by order