Active Member
|
[China]
Address: No.21 Tongshun Road, Chengyang High-tech Zone, Qingdao, Shandong, China
Contact name:Sophia
Qingdao Futai Electromechanical Technology Co. Ltd. |
|
|
Screw Air Compressor Valves Repair Thermostat Core Kit 719750
The function of the Thermostatic Valve is the regulation of the oil flow in oil-injected screw compressors. Fastest possible regulation of the oil temperature to the optimum operating temperature to ensure full performance of the oil and to avoid premature condensation fall-out.
| Brand | Product Name | Part Number |
|---|---|---|
| Atlas Copco | Thermostat 70°-85°C | 1202586901 |
| Atlas Copco | Thermostat 60°C | 1202586902 |
| Atlas Copco | Thermostat 55°C | 1202586903 |
| Atlas Copco | Thermostat Core | 1613688303 |
| Ingersoll Rand | Thermostat | 22186720 |
| Ingersoll Rand | Thermostatic Element | 39207402 |
| Ingersoll Rand | Thermostatic Element | 39437645 |
| Ingersoll Rand | Thermostatic Element | 39442439 |
| Kaeser | Maintenance Kit Thermostatic Valve 70°C | 400952.00010 |
| Kaeser | Maintenance Kit Thermostatic Valve 75°C | 400952.00020 |
| Kaeser | Maintenance Kit Thermostatic Valve 80°C | 400980.00030 |
| Kaeser | Maintenance Kit Thermostatic Valve 85°C | 400980.00040 |
| Kaeser | Maintenance Kit Thermostatic Valve 65°C | 401811.0 |
| Kaeser | Maintenance Kit Thermostatic Valve 75°C | 401811.00020 |
| Kaeser | Maintenance Kit Thermostatic Valve | 401811.00030 |
Product advantages
Why thermostatic valve is required?
The valve is needed for when the compressor is still cold (after stop) or when it is running in very cold conditions (winter).
When the compressor oil is cold, the valve is bypasses the oil cooler so no oil flows through the cooler. This is done to heat up the oil as soon as possible to remove water condensate.
Low temperatures are the number 1 enemy of screw compressors. The compressor needs to heat up quickly to remove any water condensate as quickly as possible.
If you remove it, one of two things will happen: all oil will flow through the oil cooler. Or no oil flows through the oil cooler at all. Probably the second thing will happen as it’s the path of least resistance.
