1623038500 Atlas Copco Check Valve Alternative Air Compressor

Atlas Copco Check Valve 1623038500 Alternative Air Compressor

In order to guarantee the normal work of the safety valve and prolong the service life of the relief valve, in use should be regularly check whether the running safety valve leakage, jam and spring the abnormal phenomenon such as corrosion, and observe the adjusting screw tight set screw lock nut and adjust the circle if there's any loose, if the appropriate maintenance measures are taken in time when problems found. The safety valve should also be removed regularly for comprehensive cleaning, inspection and re-grinding, setting back to use butterfly valve valve gate valve stainless steel hydraulic control valve solenoid valve anti-theft valve. In the air compressor, the safety valve installed in the gas storage tank/oil and gas separator should be checked at least once a year. The adjustment of the safety valve should be carried out by professionals. Every three months, the lever should be loosened at least once to make the valve open and close once, otherwise it will affect the normal work of the safety valve. Inspection steps of the air compressor safety valve: close the air supply valve; Connect water source; Starting unit; While observing the working pressure, slowly rotate the adjusting bolt of the pressure regulator clockwise. When the pressure reaches the specified value, the safety valve has not been opened or opened before reaching the specified value, it must be adjusted. Air compressor safety valve adjustment steps: remove the cap and lead seal; If the valve is opened too early, loosen the lock nut and tighten the positioning bolt half circle, if the valve is opened too late, loosen the lock, tighten the nut about one circle and loosen the positioning bolt half circle; Repeat the test step, if the relief valve does not open at the specified pressure value, adjust it again