Active Member
|
[China]
Address: No.88,yingbin road,industrial development zone,botou city,hebei province
Contact name:Li
hebei feixiang roll forming machinery co,ltd; |
|
|
Automatic Steel Profile Roll Forming Machine , Easy Operate Metal Roof Panel Machine
1. Product Description
Profiled Steel Sheet Concrete Slab Plate Floor Decking Panel Roll Forming Machine With PLC ,the finished product are of many features,such as simple shape,large wave height,high intensity and good adhesiveness when pouring the concrete together with the welded steel wire net on-site,in the high story building,it not only can save steel mould board,but also reduce the bearing of the floor: on basis of equal capacity,it reduces the steel amount of engineering useage,so that it saves cost of investment.
2. Machine details
Brand: Feixiang
Model number:Profiled Steel Sheet Concrete Slab Plate Floor Decking Panel Roll
Forming Machine With PLC
Voltage requirement: 380v50HZ,3PH
Working speed:8-10/min
3. Machine composition
| No. | Name | Unit | Qty |
| 1 | Decoiler | set | 1 |
| 2 | Main Machine for roll forming | set | 1 |
| 3 | Control System(PLC) | set | 1 |
| 4. | Hydraulic oil pump | set | 1 |
| 5. | Product stand | set | 1 |
Decoiler have manual decoiler,Electric decoiler and Hydraulic decoiler,can booking as request
4. Main parameters
| Length of the main part | About10500*1650*1500mm |
| Weight of main part | About 9.5 ton |
| Voltage | 380V/50HZ3Phase (as customer`s request) |
| Roller fixer | Middle plate welded |
| Frame | 350H steel welded |
| Middle plate thickness | 20mm/18mm/16mm/14mm/12mm |
| Drive mode | Chain Drice//Gear Drive |
| Material of rollers | 45# steel, surface hard chromium plating. |
| Material of shafts | 45# steel |
| Diameter of shafts | Φ80mm(depend on defferent design) |
| Number of rollers: | 22 rollers |
| Main power | 5.5kw |
| Cutting&Hydraulic | Double guide pillar |
| Hydraulic motor power | 3kw,4kw |
| Hydraulic Pressure | 10-12MPa |
| Cutting drive | Decelerating motor + Chain drive gear all by high-frequency |
| Control System | PLC system: Mitstubishi, Panasonic,Detal,Siemens,Schneider |
| Feeding Material width | Better as your drawing or from our designer |
| Feeding Thickness | 0.8~1.2mm |
| Effective width | Better as your drawing or from our designer |
| Productivity | 8-12/min |
5.package and shipping
The machine naked in the container or packing as your required.
Payment: 30% T/T in advance and balance 70% after inspection
confirmation before shipment.
Delivery: within 45 working days after receipt of deposit
Guarantee: One year, and we will provide the technical support for
the whole life.
