Metal Tile Cold Roll Forming Machine For Color Steel / Galvanized
Coil With 18 Forming Stations
Main Technical Specifications
1). 5 Ton Manual Uncoiler Decoiler Type: Manual type decoiler Manual expanding, Passive uncoiling Weight capacity: 5 Ton I.D: 508mm
|
2). Feeding Guide - Two guiding platforms are set at right and left of the feeding
entrance of the main machine.
- The material being fed into the main machine by the two guiding
platform can keep the correct position to the roll forming system.
It can be manually adjusted by screw bar.
|
3). Main Roll Forming Machine - Forming material thickness: 0.3-0.7mm
- Forming material type: GI or Carbon Steel
- Feeding type: guide feeding
- Machine Frame: high grade steel welded and tempering treatment
- Shaft Material: 45# high grade steel tempering treatment (HB220-260)
- Shaft Diameter: Φ 75mm
- Bearing: HRB bearing ( Top Chinese brand )
- Roller Material: 45# high grade steel, and roller surface with hard chrome ≥ 0.05mm
- Forming Station: ≈ 18 stations
- Forming Speed: 0-15m/min, excluding cutting time
- Forming Motor: ≈7.5KW
- Forming Stand Type: Welded Wall Plate Frame with Chain Drive
|
4). Pressing & Cutting & Hydraulic Station - Cutting shear & pressing type: Hydraulic cutting, pressure-type one mould
- Cutting type: Hydraulic cutting after roll forming, Burr-free
cutting
- Cutting blade material: Cr12Mov, Quench treatment, HRC58-62
- Hydraulic system to supply power for pressing / cutting device
- Hydraulic Station Power: 5.5KW
- Cutting Tolerance: 10m ± 2.0mm
|
5). PLC Control System - The entire line is controlled by imported PLC, LCD touch screen
human-machine interface. People interact with the PLC. Operator by
setting the program to run automatically (programmable control) to
monitor and control process, to achieve the operator to control the
production line and modify the control parameters, and real-time
monitoring of equipment status, operating parameters and fault
indication. Work piece length digital setting, work piece length
adjustable. Real-time monitoring of equipment operating status and
fault indication.
- Operation: manual / automatic. It is convenient to maintenance with
the manual model and there are emergency stop bottom on it.
|
Finished Sample Sheets
Working Flow Chart
Applications
Glazed tile, Roof Tile, Metal roof tile; steel roof tile; color
steel tile; color glazed tile; wave tile; steel roofing
sheet; metal roof panel; steel roof panel; roof wall cladding; roof
cladding; wall cladding
Contact of WUXI TECHWELL