2 In 1 Metal Stud Track Cold Roll Forming Machine For C Stud &
U Runner 2 Lines
Main Technical Specifications
1). 3 Ton Manual Uncoiler Decoiler Type: Manual type decoiler Manual expanding, Passive uncoiling Weight capacity: 3Ton I.D: 508mm
|
2). Feeding Guide - Two guiding platforms are set at right and left of the feeding
entrance of the main machine.
- The material being fed into the main machine by the two guiding
platform can keep the correct position to the roll forming system.
It can be manually adjusted by screw bar.
|
3). Hydraulic Pre-punching - Punching Die: Cr12 Mov, quenching process
- Punching Die size: according to drawing
|
4). Main Roll Forming Machine - Forming material thickness: 0.3-0.7mm
- Forming material type: GI or Carbon Steel
- Machine Frame: high grade steel welded and tempering treatment
- Forming rollers: 2 lines ( one line for C stud profile, Another line for U track profile. )
- Shaft Material: 45# high grade steel tempering treatment (HB220-260)
- Shaft Diameter: Φ 65mm
- Bearing: HRB bearing ( Top Chinese brand )
- Roller Material: 45# high grade steel, and roller surface with hard chrome ≥ 0.05mm
- Forming Station: ≈ 14 stations
- Forming Speed: 0-15m/min, excluding cutting time
- Forming Motor: ≈7.5KW
- Drive Type: Chain Drive
|
5). Cutting & Hydraulic Station - Cutting type: Hydraulic cutting after roll forming, Burr-free
cutting
- Cutting blade material: Cr12Mov, Quench treatment, HRC58-62
- Hydraulic system to supply power for cutting device
- Hydraulic Station Power: 5.0KW
- Cutting Tolerance: 10m ± 1.5mm
|
6). PLC Control System - The entire line is controlled by imported PLC, LCD touch screen
human-machine interface. People interact with the PLC. Operator by
setting the program to run automatically (programmable control) to
monitor and control process, to achieve the operator to control the
production line and modify the control parameters, and real-time
monitoring of equipment status, operating parameters and fault
indication. Work piece length digital setting, work piece length
adjustable. Real-time monitoring of equipment operating status and
fault indication.
- Operation: manual / automatic. It is convenient to maintenance with
the manual model and there are emergency stop bottom on it.
|
Reference Profile Drawing
Main Components
- Uncoiler / Decoiler
----------------------------------------------------- 1 Unit
- Pinch Feeding
---------------------------------------------------------- 1 Unit
- Hydraulic Punching
---------------------------------------------------- 1 Unit
- Main Roll Forming Part
----------------------------------------------- 1 Unit
- Hydraulic Cutting
------------------------------------------------------- 1 Unit
- Electrical Control System
-------------------------------------------- 1 Unit
- Support Tables
--------------------------------------------------------- 1 Unit
Working Flow Chart
Manual Decoiler → Pinch Feeding → Punching → Main Roll Forming →
Hydraulic Cutting → Support Table
Applications
Metal stud and track, steel stud and track, c stud, u runner, u
track, furring channel, roof ceiling batten,
roof truss, c truss, light weight steel truss...
More Machine Photos
Contact of WUXI TECHWELL