Active Member
|
[China]
Address: 江苏省无锡市惠山区洛社镇石塘湾运河东路5号
Contact name:Jillian Zheng
Wuxi Shuangyong Precision Stainless Steel Belt Co., Ltd. |
|
|
Hydraulic Cutting C Z Sigma Purlin Cold Roll Forming Line With High Grade 45# Steel And Rectifying
C Z Purlin Roll Forming Machine Working Flow
Decoiler------- Feeding ,Guiding And
Levelling------- Hydraulic Punching--------Main Roll
Forming-----Cutting----Collect products
Profile Drawing Of C Z Sigma Purlin
Composition of C Z Purlin Roll Forming machine
| Decoiler |
| Roll forming main machine |
| PLC Control System |
| Hydraulic station |
| Pre-cutting device |
| Pre-punching device |
| Safety cover device |
| Out Put table |
Main Specifications Of C Z Sigma Purlin Cold Roll Forming Line
Coil Material | Thickness | 1.2-3.2mm |
Coil width | Depend on customer’s requires | |
Yield Strength | 250-350Mpa | |
Material | GI. Carbon Steel | |
Purlin Sizes | Web width | 100-300 |
Height | 35-45 | |
Lip | 15-25mm | |
Decoiler / Uncoiler | Coil Width | Max. 600mm |
I.D | 510-610mm | |
O.D | Max. 1300mm | |
Capability | Max. 5 Tons | |
Decoiler type | Manual / Hydraulic/Automatic | |
Feeding & Leveling | Pinch feeding | 3 Units ( 6 Rollers ) |
Leveling | 7 Rollers ( Upper 3 Rollers, Bottom 4 Rollers ) | |
Punching device | Punching motion | Hydraulic Punching, Post-punching |
Punching dies | Cr12 Mov Steel, HRC58-62 | |
Punching station | 1-6 Unites ( depend on hole patterns ) | |
Punching in longitude controlled by PLC, punching at horizontal adjusted by manual hand wheel. | ||
Cutting device | Cutting motion | Hydraulic Cutting, post-Cutting ( cutting sheet after forming ) |
Cutting blades | Cr12Mov with heat treatment HRC58-62 | |
Length Measuring | Automatic length measuring by encoder & PLC. | |
Cutting Tolerance | +/-1.5mm(per 3m) | |
Roll Forming Machine | Forming Stations | 22 Stations |
Rectifying | 1 unit | |
Roller material | GCr15 steel, heat treatment | |
Diameter of shaft | 80mm | |
Shaft material | High grade 45# steel | |
Drive type | Chains | |
Forming speed | 0-15m/min | |
Main power | 18.5KW | |
Servo motor | 1 Units | |
Electrical control | PLC | PANASONIC Brand or Custom-made |
Inverter | YASKAWA Brand or Custom-made | |
Touch screen | MCGS Brand or Custom-made | |
Operation type | Touch screen & Button | |
Hydraulic Station | Hydraulic station | Famous Chinese brand |
Hydraulic power | 7.5KW | |
Runout Table | Table type | Simple non-power type |
Function | To support the finished panels | |
TOTAL WEIGHT |
| APRRO 12 TONS |
C Z Roll Forming Machine Picture
C Z Roll Forming Machine production line can produce many kinds of CZ purlins by the quick interchange just need 15 minutes to turn the rollers at 180 degrees, then you can produce C Z Purlins.
The whole production line include : Decoiler, Feeding and levelling mill, Pre-punching , pre-cutting, Main roll forming machine, Collect C Z Purlins
Other Parts of C Z Roll Forming Machine
Payment Terms
| Procuments Aspects | Detailed Rules |
|---|---|
| Payment Terms |
The payment Should be paid by L/C or T/T(30% down payment and the balance for 70% shall be paid before container loading at the seller`s factory when the buyer confirms the quality is up to the contracted requirements |
| Delivery Time | 30-65 working days after the receipt of the payment |
| Packing | Suitable for sea transportation.Usually one High precision Grape stake roller formed facility loads in one container.Depends on the machine's size and weight |
| Warranty | 1 year warranty from the date of shippment |
We also produce other Roll forming machines as follow:
|
Contact Us
| Company | Zooy Machinery CO,LTD |
| Email: | wxzooymachinery@yahoo.com |
| Skype | wxqinghing |
| Website: | www.rollerformingmachine .com www.wxzooy.com |
| Cell: | +86-13564970040 |
| Contact Person: | Crystal Zhao |
