Active Member
|
[China]
Address: No 87,Sandun Road, Jiangyin City, Jiangsu Province
Contact name:Mary
Jiangsu LCD Technology Co., Ltd |
|
|
Working procedure
Decoiler—Feeding—knurling--_Rollforming----Hydraulic stepping--hydraulic cut to length—output table
Product introduction
The ridge cap roll forming machine is use with the roof panel together, to make the roof shadow, it have differents types, the fllowing is hot sale all around the world.
The conponents of the machine
| Name | Quantity( set) |
| Decoiler(manual or hydraulic for options) | 1 |
| Feeding device | 1 |
| Main Forming Machine | 1 |
| Hydraulic cutting device | 1 |
| Hydraulic Station | 1 |
| PLC computer control system | 1 |
| 4m Run Out Table | 1 |
Main technical parameters
| Name | Specification |
| Main motor power | 4 KW |
| Working pressure | 10-12MPa |
| Voltage | 380V /3phase/ 50 HZ |
| Drive | By chain |
| Control System | PLC panasonic |
| Length measurement | Encoder |
| Main Frame | H-Beam steel |
| Chain Size | 1inch/2inch |
| Feeding Material | Up to the finals design |
| Working speed | 12-20 meters/min |
| Number of roller stations | 14 groups |
| Shaft diameter | 70mm/75mm |
| Roller material | 45# steel |
| Cuttting material | Cr12 mould steel |
After sale services
1). Engineer will give free training lessons to labors in buyer’s factory.
2). The Buyer will buy the round-trip air ticket for Engineer if visa application is approved. The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD80 for engineer.
3). During this guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, we will provide the buyer spare parts at cost price.
We will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide.
Machine pictures
