|
[China]
Trade Verify
Address: No 16th Kangzhong Road ,Kangqiao Industry Park, Gongshu District ,Hangzhou China
Contact name:Csilla Wang
HANGZHOU QIANHE PRECISION MACHINERY CO.,LTD |
|
Verified Suppliers
|
|
|
Servi Tensioner /Winding Tensioner (2-800gf ) For Fine Wire Coil , Relay , Ignition Coils
High Precision Coil Winding Servo Motor Tensioner
Tensioner is a necessary factor for keeping consistent winding
accuracy.
Selecting better tensioner provides a sophisticated winding machine
with best performance.
Stabilized tensioner improves winding problems and enhances
productivity. For example,
stabilized tensioner causes no breaking of wire, raises operation rate, secures the value of
resistance, and increases credibility of the product.
Perfect layer winding leads to material cost cutting and easy
adjustment. Therefore, time and cost
for machine maintenance can be decreased.
QIANHE Company has a wide range of tensioner types, from basic
Magnetic type tensioners to
servo motor tensioners.
Features:
The servo tensioner uses a DC Servo Motor and a Drive as an active wire feeding mechanism.
Its mainfeatures are as following:
1, Follow the speed of the winding machine and actively wire
feeding ;
2, DC Servo Motor with High Precision Encoder and Advanced Driving
Technology:
A,High tracking accuracy, high tension stability, acceleration and
deceleration up to 0.3s；
B,High speed, large torque, large tension range, simple selection;
C, High efficiency, energy saving and low power consumption, motor
and drive work for
a long time with very low heating, no need heat dissipation;
D. Stable online measurement function;
E,It can directly adjust the parameters of the motor and the
working angle of tension arm by
connecting the USB interface of tensioner with PC software. It is suitable for winding various
coil products of various winding machines.
3. The tension range is 2-2000 gf and the suitable diameter is
0.02-0.80 mm.
Note: 485 Modbus RTU communication protocol: baud rate 115200, data
8 bits, no parity,
1 stop.Using the tension value signal provided by the machine to
communicate with
the winding machine can realize the functions of tension data
acquisition and upper
and lower limit setting.
Specification :
| Part.No. | Product Model | Maximum wire speed | Tension Stage | Tension Scope | Applied wire diameter | Tension Rod |
| (g) | (mm) | |||||
| 1 | SF600 | 18m/s | one stage | 2-600 | 0.02-0.28 | SF-1# SF-2# SF-3# |
| 2 | SF800 | 18m/s | two stage | 2-800 | 0.02-0.4 | |
| 3 | SFD2000 | 9m/s | two stage | 300-2000 | 0.2-0.8 | SF-5# |
Main parameters
| Product Model | Power | Power | Input Air Pressure | Mounting Hole | Weight | Product Size |
| SF600 | DC48V | 100W | / | Ф 16mm | 2.0kg | 265*170*75(mm) |
| SF800 | 5kg/cm ² | 2.5kg | 310*170*85(mm) | |||
| SFD200 | 200W | 3.7kg | 350*195*90(mm) |
The Product Electrical Characteristics
1,Power Supply: 24-48V
2,Rated Power:100W/200W
3,Rated Current:2.7A/5.5A；working current is less than 0.5A
4,Anti-reverse connection: can withstand 48V reverse connection;
anti-surge;
can withstand 600V voltage1ms impact
5,Continuous working time: continuous
Picture Display:
Thank you for choosing our products,in order for your proper using ,please read and keep
this instructions carefully before use .
�.Please read the contents of this manual before using this product.
�.Please use the products according to the instructions and careful operation, other
method beyond the provisions of this specification,will impact the products safety ,service life.
�. In this manual, the technical specifications are subject to change without prior notice;
�. Resolutely resist unauthorized reprinting of the contents of this manual;
�. If there are any omissions or mistakes in this instruction, please forgive us. any questions
contact us in time.
�.This products with strict,inspection before out of factory ,if any questions please contact us in time .
