Qingtie Intelligent Technology (Zhejiang) Co., Ltd. |
Carbon Steel Mold Turnover Machine / High Power Pallet Flipper 5.5KW
Mold Turnover Machine Technical Description
Overturn steady , high efficiency, 3 minutes when turning at 90 degrees
The primary of the machine is to have large blocks overturn angle, instead of manually using the lever to reduce the labor of workers and improve labor productivity.
Mold Turnover Machine main features:
1. Drive with double row chain.
2. Adopt super worm gear reducer.
3. The four-wheel mechanism with reasonable structure makes the
turning stable.
4. When turning over, use double protection switch device
(mechanical limit switch, electric limit switch limit) to make the
position changer and interlock with the safety protection safety
door.
5. When the material is up and down, the table top is stable.
6. After the flip is completed, the flip will end automatically.
7. Use the emergency stop button to quickly stop the flip in an
emergency.
8, can be stopped at any position during the flipping process.
9. The turning faces are: plane A and plane B (length 2200mm, width
1500mm), paved polyurethane board: thickness 15mm
Mold Turnover Machine main parameters:
Name: | Mold Turnover Machine | Motor Reducer: | 5.5KW (domestic) |
---|---|---|---|
Material: | Carbon Steel | Machine Weight:: | About 4T |
Power Supply:: | 380V, Three-phase Five-wire Main Configuration | Feature: | High Power |
Mold Turnover Machine installation
The Mold Turnover Machine is fixed to the ground with suitable expansion bolts to prevent
displacement of the equipment.
Five, other
Equip the equipment instruction manual (including daily maintenance
requirements) and safety operation instructions.