Automatic Hihg Speed Coil Shearing Metal Slitting Machine Width 300
Mm - 2000 Mm For Cutting
Machine basic information
1 | Raw material | hot rolled, cold rolled,galvanized steel strips |
2 | coil thickness | 1mm-6mm |
3 | coil width | 300mm-2000mm |
4 | coil inside diameter | 508mm |
5 | coil outside diameter | less than 1800mm |
6 | coiler weight | Max 30 tons |
Introduction:
We produce our slitting lines are to maintain high precision while
allowing for changes to be made on the fly. High capacity coilers
and total control over the machinery with state of the art
technology to oversee quality control and automation, we offer our
lines on time and on budget!
Production Process
Hyrdaulic →Carrying coil car→Hydraulic single arm decoiler→Feeding
guide plate fitting→pinching machine,coil shearing→Front looping
table→Side guiding fitting→Disc shear→Curling machine→Back looping
table→Tension table→Recoiler→Discharging car→Hydraulic
control→Electric control
- Hydraulic single arm decoiler Form by bracket,guide seat,hydraulic
expanding axis ,hydraulic oil cylinder and so on.Axis structure:
form by 4 pieces of wedge slider.Reel is hydraulic powered and
expands coil. Decoiler uses pneumatic disc type brake to work with
follow-up machine line speed and have fast brake when outage, and
avoid spreading because of rotated inertia.Decoiler has fixed
pressing fitting, pressing wheel has PU notch so that convenient to
pull out packing band and decoil.Pressing wheel is controlled by
oil cylinder to lift.
- Feeding guide plate device:Form by flexible feeding guide plate
with driving cylinder.Assist decoiling and sending material so the
head of coil could enter into pinching machine.Guiding plate
extends and lifts to a suitable place,guiding head of coil. Plate
lifting, stretching is driven by oil cylinder.
- Scrap rewinder Type:rotating disc type.Form by motor,helical worm
geared reducer,rotating disc,base and so on;Infinitive speed to
make same with disc shear.
- Function:separate the slitted coil and recoil,reel use DC adjusted
motor to drive rotating and expanding and clamping by hydraulic.
Clamping block is hydraulic expanding structure.Hydraulic
cantilever type coil separator could enlarge when rise ,could press
tightly all the time.Have pneumatic fast-brake fitting.
Structure:cantilever type coil separator: form by cantilever,
splitter, spacer and separator axis.Oil cylinder offers power to
lift.
- Hydraulic system Summary:hydraulic system is formed by hydraulic
station and related pump,valve,pipes,hydraulic station offer power
to carrying coil car,decolier,Feeding guide plate device,looping
table plate,tension table,recoiler.
- Air pressure system Summary:Form by air supple(Buyer preparing),
air supple element, magnetic valve, and related pipes, cylinder
- Manufacturing shop Producing line length is about
25meter.Manufacturing shop area should be minimum: 31M (L)*10M
(W)*6M (H) You should have one set of crane which could load over
16T and other corollary equipment in manufacturing shop.
- Advantage
the technical and design of cut to length machine is from Taiwan.We
should design and cooperate with you according to your
requirements.
Perfect equipment needs a combination of superb technology and rich
experience.that means the technology of the machine and experience
are both important, We provide a lot of equipment to the steel
processing city nearby our company.Their processed steel is sold
all over the country and the world, from which our equipment has
gained rich experience, Choose us, you are not only get the good
machine, but also the experience and technology .
Market distribution
we are start the export of the machinery since 2006, and now the
cut to length Machine has been exported to more than 50 countries,
the main market like Asia, Europe, Middle East, Russia, S.Africa,
Southeast Asia and Africa. We are getting reputed in the world
market.
Slitting machine specification
Accordingly to the market demands. We are given the standard models
as blew, and this is for your reference only, the production range
and main technical can be adjustable suppose your company have
special requirement.
Slitting machine line Specification |
Mill Model | Width (mm) | Thickness range(mm) | Speed (m/min) |
FJY0.2-2*800/1250/1600 | 300-800/1250/1600 | 0.2-2 | 70-100 |
FJY0.5-3*800/1250/1600 | 300-800/1250/1600 | 0.5-3 | 70-90 |
ZJY0.2-1.5*600 | 100-600 | 0.2-1.5 | 150 |
ZJY0.3-2.0*1250/1600 | 400-1250/1600 | 0.3-2.0 | 150 |
ZJY0.3-3.0*1250/1600/2000 | 400-1250/1600/2000 | 0.3-3.0 | 150 |
ZJY1.0-6.0*1600/2000 | 700-1600/2000 | 1.0-6.0 | 60 |
ZJY2.0-10.0*1600/2000 | 800-1600/2000 | 2.0-10.0 | 30 |
ZJY3.0-12.0*2000 | 800-2000 | 3.0-12.0 | 30 |
ZJY4.0-16.0*2000/2500 | 800-2000/2500 | 4.0-16.0 | 30 |