Home Companies Color Optic Limited

400G SR4 OSFP Module 50m Multimode Parallel Transceiver With MPO-12/APC

Color Optic Limited

Contact Us

[China] country

Trade Verify

Address: 8th floor, Daqing building A, Futian District, Shenzhen, China.

Contact name:Li

Inquir Now

Color Optic Limited

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

400G SR4 OSFP Module 50m Multimode Parallel Transceiver With MPO-12/APC

Country/Region china
City & Province shenzhen
Categories Other Surveillance Products
InquireNow

Product Details

400G SR4 OSFP Module 50m Multimode Parallel Transceiver With MPO-12/APC

 

This is an InfiniBand (IB) and Ethernet (ETH) 400Gb/s, Single-port, OSFP, SR4 multimode parallel transceiver using a single, 4-channel MPO-12/APC optical connector. The Short Reach 4-channel (SR4) design uses 100G-PAM4 modulation and has a maximum fiber reach of 50-meters using OM4 multimode fiber and assumes two optical patch panels in the link. It has identical design and internals as the QSFP112 version, only with different connector shells.

The transceiver firmware supports both InfiniBand and Ethernet and is automatically enabled depending on the protocol of the switch attached to. The OSFP shell has a flat-top and utilizes the riding heat sink (cooling fins) on the ConnectX-7 connector cage.When linked to 1:2 splitter fiber cable split end has only 2 channels and will activate only 2-channels in the 400G transceiver automatically creating a 200G speed and reducing power.

Multimode optics is denoted by a tan-colored pull tab and aqua-colored optical fiber. Green plastic shell on the MPO-12/APC optical connector denotes Angled Polish Connector and is not compatible with Ultra-flat Polished Connectors (UPC) (aqua colored). 

 

Key Features
  • InfiniBand (IB) and Ethernet (ETH) support
  • 400G SR4 multimode
  • 4-channels of 100G-PAM4 electrical and optical modulation
  • Flat top OSFP connector shell
  • 850nm VCSEL
  • Maximum reach: 30m using OM3 fiber 50m using OM4 fiber
  • Single MPO-12/APC optical connector
  • Operates as a 200Gb/s NDR200 transceiver with 2-fiber splitter ends
  • 8.5 Watts (max) using 4-channels
  • 6.5 Watts (max) using 2-channels
  • Single 3.3V power supply
  • Class 1 laser safety
  • Hot pluggable, RoHS compliant
  • OSFPmsa.org compliant
  • CMIS 4.0 compliant
  • Case temperature range 0°C to +70°C
Application
  • 400G Ethernet
  •  Infiniband interconnects
  •  Datacenter Interconnect
  • Enterprise networking
 

Hot Products

400G SR4 OSFP Module 50m Multimode Parallel Transceiver With MPO-12/APC This is an InfiniBand (IB) ...
400G QSFP-DD FR4 CWDM4 2km LC Transceivers Optical module designed for 2km optical communication ...
400Gb/S OSFP SR8 100m MMF OM3 Module With FEC & MPO-16 Connector This product is a parallel 400Gb/s ...
OSFP Module 400G FR4 2km Supports InfiniBand And Ethernet With MPO-12/APC This product is a 400Gb/s ...
400GBASE-LR8 Ethernet 10km Reach Transceiver Module Parallel Optics This is is a high performance ...
200G QSFP-DD 2X100G CWDM4 2km CS SMF Transceivers This is 2x100G QSFP-DD CWDM4 optical transceiver ...