Easy Operate Sand Core Shooting Machine Manual / Semi Automatic / Fully Automatic Type

Easy Operate Sand Core Shooting Machine Manual / Semi Automatic / Fully Automatic Type

1. Device: PLC control (Siemens) (the machine has the function of automatic fault detection and analysis, and the failure analysis of the machine will be displayed on the touch screen in the form of pictures, and the Siemens touch screen).

2. Operation: pneumatic transmission.

3. Operation function: manual, semi-automatic and fully automatic (with conveyor belt) (the conveyor belt is a parallel lifting structure with a scale, which can quickly and accurately adjust the suitable height of the conveyor belt and the mold).

4. Power: the heating power is adjustable, and the heating tube is 12 * 1000W on each side.

5. Electric heating: automatic constant temperature (dynamic and static mold can be independently controlled) (heating can be reserved).

Mold shot sand surface automatic cleaning function.

6. Closing stroke: 300mm.

7. Pin stroke: 30mm (moving die mechanical, static die pneumatic).

8. Core pulling function: standard stroke 150mm, adjustable stroke (mechanical limit).

9. Maximum center distance of shot hole: 320mm.

10. Shortest cycle of theoretical operation:20 seconds.

11. Maximum core mass: 4000g.

12. Slow start device to protect the stability of the machine.

13. Low working pressure alarm.

14. Tricolor warning light.