Dongguan Taesin CNC Technology Co., Ltd. |
|
20000 RPM CNC Vertical Drilling Machine Direct Drive Spindle Long Term Working Life
CNC Vertical Drilling Machine Characteristics:
High speed and high precision drilling performance can be done by Taesin’s high quality CNC Vertical Drilling. Almost no vibration and no deformation at high speed ensures the optimum drilling performance and long-term working life, because our machine is equipped with rigid and reinforced body structure and construction.
The high quality and perfect finishing surface can be guranteed by the direct drive 20000 RPM spindle and fast move linear ways, which also provide higher productivity and superior surface finish.
Taesin CNC Vertical Drilling Machine's Pyramid Structure provides some advantages: stable, stiff, rigid and no deformation body support. And for workpiece, it can gurantee accuracy, rigidity and thermal stabililty.
For providing zero error products, Taesin use HEIDENHAIN measuring system to do checking and inspecting. With the full and rich knowledge of the precision operation, our engineer can make high precsion drilling machine.
CNC Vertical Drilling Machine Service Support:
For the machine tools, service support is an important factor for customers. Because this can influence the right use and after-sales service. Without professional service, customer has a big worry and stunning opinion of high quality products.
Taesin has supported an experienced and effective service team to check and analyze any failures in the machine. With years of accumulation, we can handle any problems or failures easily. The reasons of problems are often easily and rapidly identified once failure takes place. We can often guide customers by mobile with experience and professional knowledge. We are very efficient in fixing our own machines, because we not only install, but also we manufacture and do R&D.
The customer support include installation guidance, handing over, upgrading and rebuilding of the machine. Taesin has also prepared the maintenance manual for quality guarantee and cost-effective operation. By doing periodic inspection of the machines, some potential failure or expensive repair can be avoided.
In our company, we also set up a academy to provide machine operation, maintenance and repair training for providing high-level continuous education to operators. We also set up a knowledge and experience forum to share important information with you. If you want professional and knowledgeable CNC Machine training or employee training, you can come to our academy to finish this.
CNC Vertical Drilling Machine Specific Features:
1. Super Wide Saddle Base
2. Rib-structure Spindle Support for Stability
3. 16T Magazine: Fast and Precise Tool Change
4. X/Y/Z Two-plate Shield Design to Reduce the Impact and Noise
5. Back Iron Chip Removal Design, Compact Design and Structure for Delivered by Elevator.
6. Super-size Column without Deformation at Traverse Speed 60m/min
7. Super-wide Base with 6-point Support: No Vibration and No Deformation
8. X/Y/Z Traverse Speed: 60m/min: High Speed and Time Saving
9. Low Inertia Spindle Design: High Stability, Fast and Precise Tool Change:2.0S; Also Can be Used for 10. Small Diameter Hole Processing
11. High Efficient AC Servo Motor and Man-machine Interaction for Easy Operation
CNC Vertical Drilling Machine Technical Data:
Technical Data | T5 | T6 |
X/Y/Z Axis Travel mm | 500/400/300 | 800/500/500 |
Working Table Size mm | 400*650 | 700*420 |
Max Load (KG) | 250 | 250 |
Spindle Tool to Working Table mm | 150-450
| 150-450
|
T-slot | 3-14*100 | 3-14*125 |
Rapid Traverse Speed m/min | 60 | 60 |
Cutting Feed Rate mm/minute | 1-12000 | 1-12000 |
Spindle Motor KW | 5.5 | 5.5 |
Spindle Speed rpm | 20000 | 20000 |
Positioning Accuracy mm | ±0.003/300 | ±0.003/300 |
Repeated Positioning Accuracy | ± 0.0025mm | ± 0.0025mm |
Weight kg | 3000 | 4000 |
Size mm | 1900*2700*2400 | 2300*2900*2500 |