|
[China]
Trade Verify
Address: No. 4, South 1st Road, Lianhe Industrial South District, Luocun, Shishan Town, Nanhai, Foshan City
Contact name:Lei Xiaoyan
FOSHAN LIDEXIN MACHINERY MANUFACTURING CO., LTD. |
|
Verified Suppliers
|
|
|
LDX-026A Manufacturers direct custom model large TCT saw blade sharpening machines
TCT saw blade grinding machine dry grinding or water grinding good:
1,The first is cleaning, need to cooperate with the correct cleaning fluid.
2,Check the tool head to see if the teeth are broken, the teeth are lost, the degree of wear and the tool head is bent. Then the tool head repair, wear serious can only be replaced.
3,Put in the fully automatic grinding machine with good debugging parameters for automatic repair. However, the pre-commissioning of the machine requires attention to the choice of grinding wheel. The choice of grinding wheel is to pay attention to the strength of grinding wheel, feed speed and time.
| Technical parameters: |
| Processing saw blade diameter range: ￠300- ￠ 1800mm |
| Saw blade aperture: ￠ 10-220mm |
| Saw blade thickness (steel plate): 1-12mm |
| Tooth pitch: 7-120mm |
| Tooth surface angle: 5 degrees to+30 degrees |
| Tooth top back angle: 6-45 degrees |
| Left and right inclination of teeth: tooth tip/tooth surface 45 degrees |
| Blade grinding stroke range: maximum 25mm (adjustable) teeth/minute |
| Grinding speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth/minute |
| Grinding wheel size (outer diameter x hole): (￠ 125mm x ￠32mmX1mm) |
| Negative chamfer grinding: -27 degrees |
| Grinding head rotatable angle: 90 degrees and 180 degrees |
| Grinding wheel linear speed: 26m/s |
| Flow rate of coolant water pump: 501/min |
| Volume of coolant cylinder: 85L |
| Total power: 2.2 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 1200KG |
| Mechanical dimensions (length x width x height): 1800X1400X1800mm |
| Technical features: |
| The design of this machine refers to the characteristics of similar domestic and foreign models, absorbs and analyzes the advantages of the same type, and makes some functional improvements. This equipment is specifically designed for grinding large alloy saw blades. |
| 1. Pre set multiple sets of tooth profiles for one click multifunctional operation. |
| 2. The flat teeth of the ladder can be completed in one go, with
CNC grinding and any tooth shape, which can increase efficiency by
three times; Improved gear extraction operation to improve accuracy
and extend service life. |
