Active Member
|
[China]
Address: Building 12, Songshan Lake, Small and Medium-Sized Science and Technology Park, Dongguan City, 523808, Guangdong Province, P.R.China
Contact name:KOMEG
KOMEG Technology Ind Co., Limited |
|
|
64L Single door open stainless steel humidity temperature chambe
Product Overview
Able to accurately simulate a wide range of complicated natural environments, and is suitable for
reliability test in industrial products. Meet GB5170.2.3.5.6-95 standard requirements of environmental
testing equipment and test methods for the basic parameters of electric and electronic products under
the condition of humidity, low temperature, high temperature, and constant heat.
Application
Applicable to environmental adaptability and reliability test in such industrial units as electronics, electrical
appliance, battery, plastics, food, paper product, vehicle, metal, chemistry, building material, research
institution, inspection and quarantine bureau, university etc..
Specifications
| Temperature | |
| Temperature range | -70 ～ 150 ℃ |
| Temp Deviation | within ± 2.0℃ |
| Temp Constancy | within ±0.5 ℃ |
| Temp Uniformity | within ±2.0 ℃ |
| Ramping and soaking rate | 1) rise : within 60min (-70 ℃ → 150 ℃) Nonlinearity (RT+25’C, no load) The heating rate is 3’C/MIN 2) fall : within 80min (150 ℃ → -70 ℃) Nonlinearity (RT+25’C, no load) The cooling rate is 1-2’C/MIN |
| Humidity | |
| Humidity range | 10%R.H～98%R.H |
| Humidity range | |
| Humidity deviation | ±3.0％RH(＞75％RH)
|
| Humidity fluctuation | ±3.0％RH (no-load) |
| 3Humidity uniformity | ±2.5％RH |
| Temperature and humidity performance test is in accordance with the relevant provisions of the IEC60068 -3 standard measurement; sensor placed in the unit outlet. | |
| Chamber Structure | |
Overall structure and chamber was composed of three parts as below. Insulation box, separate refrigeration units, and electrical control cabinet. | |
Chamber Size | Innner size: W 400 × H 400 × D 400 mm Outer size: around W600 × H 1540 × D 1220 mm |
| Insulation box | wall material: high-quality carbon steel with static color spray inner wall material: SUS304 # matte stainless steel plate Insulation materials: rigid polyurethane foam insulation layer + glass fiber. |
| Door | Single door opened, left side, add door frame to to prevent exposed at low temperature |
| Observation window | With 1 sets 380 × 560mm (width × height) observation window, multi-hollow electric insulation coated glass prevent condensation effectively |
| Lighting device | 11W/AC220V *1 located on observation window |
| Heater | High quality nickel chromium alloy wire heater, contactless control mode (SSR) |
| 7Humidifier | Water basin heating and humidification method; Stainless steel armored heater; Heater control mode: non-contact control mode (SSR); Water level control device, heater anti-drying device |
| Condensate drain hole | Equipped with the studio condensate water and the condensate drain hole |
| Cable port | Φ100mm*2 located on both sides(each*1) with rubber stopper and plastic cover |
| Sample shelves | Stainless steel sample shelves 2 layer adjustable height with 30kg/layer weight undertake |
| Mobile Casters | Mobile Casters *4 with foot cups |
| Electric control box | Total power circuit breaker, over-temperature protection. |
| Water supply system | Water pump automatic supply |
Environmental test chamber Standard
GB-2423．1-89(IEC68-2-1)Test A: Low Temperature Test
GB-2423．2-89(IEC68-2-2)Test B: High Temperature Test
GJB360．8-87(MIL-STD．202F) High Temperature Life Test
GBJl50．3(MIL-STD-810D) High Temperature Test
GJBl50．4(MIL-STD-810D) Low Temperature Test
GB2423．3-93(IEC68-2-3)Test Ca: Constant Heat Test
GB2423．4-93(IEC68-2—30)Test Db: Damp Heat Alternative Test
GJBl50．9-93(MIL-STD-810D) Damp Heat Test
Prouduct Display
Packing and Shipment:
