Active Member
|
[China]
Address: Building 12, Songshan Lake, Small and Medium-Sized Science and Technology Park, Dongguan City, 523808, Guangdong Province, P.R.China
Contact name:KOMEG
KOMEG Technology Ind Co., Limited |
|
|
High precision stainless steel 1000L temperature and humidity chanber
Description
Able to accurately simulate a wide range of complicated natural environments, and is suitable for
reliability test in industrial products. Meet GB5170.2.3.5.6-95 standard requirements of environmental
testing equipment and test methods for the basic parameters of electric and electronic products under
the condition of humidity, low temperature, high temperature, and constant heat.
Application
Temperature and humidity test chamber is also called temperature and humidity
testing machine, constant temperature and humidity experimental
chamber, programmable wet heat
alternating test chamber, or constant temperature machine. The
Temperature and humidity test chamber
is used to inspect equipments quality and test performance of
materials in various environments,
and all kinds of materials properties of heat resistance, cold
resistance, dry resistance and
moisture resistance, which is fit for Electronics, electrical
appliances, mobile phones, communications,
meters, vehicles, plastic products, metals, food, chemicals,
building materials, medical, aerospace and
other products quality inspection.
Specifications
| Model | KMH-1000R | |||||
| Inside Dimension(cm) | 100*100*100 | |||||
| Outer Dimension(cm) | 120*203.5*201.5 | |||||
| Temp range | S-70 ℃~150 ℃ | |||||
| Temp deviation | ±20 ℃ | |||||
| Temp fluctuation | ±0.5 ℃ | |||||
| Temp uniformity | ±2 ℃ | |||||
| Humidity range | 20-98%R.H | |||||
| Humidity deviation | ±3.0%RH(>75%RH)±5.0%RH(≤75%RH) | |||||
| Humidity uniformity | ±3.0%RH | |||||
| Humidity constancy | ±2.0%RH | |||||
| Heating and cooling rate | R+20 ℃↓-20 ℃Within45min L+20℃↓-40℃Within60min S+2020℃↓-70℃WITHIN80min | |||||
| -20 ℃↑+100℃D19Within35min -40 ℃↑+100℃D19Within45min -70 ℃↑+100℃D19Within60min | ||||||
| System | Balanced&Humidity Control System | |||||
| Interior material | Stainless Steel Plate(SUS304) | |||||
| Exterior material | Baked Painting Steel Or Stainless steel(SUS304) | |||||
| Insulation material | Rigid polyurethane Foam and Glass Fiber Wool | |||||
| Refrigeration system | Hermetic compressor,Single stage refrigeration CFC free refrigerant system | |||||
| (HFC-507/HFC-23)Hermetic Compressor,Cascsde Refrigeration CFC free refrigerant | ||||||
| Controllor | LCD Toch panel,Chinese or English display selectabile | |||||
| Safety Devices | No fuse breaker,over pressure,over heat and over current protectors | |||||
| for compressor,over temp.protector,over load protectoroffan,dry heat prtechto | ||||||
| Standard Accessories | Sightwindow*1,cable port(portØ50mm)*1,shelves*2,chamberlamp*1,power cable2m | |||||
| Weight(Kg) | 520 | |||||
| Ambient Temp | +5℃~+35℃ | |||||
| Power | AC380±10%50Hz 3phase 4 wires+Groud Wires | |||||
Environmental test chamber Standard
GJB150.3 high-temperature testing
GJB150.4 low-temperature testing
GJB150.9 humid testing
GB11158 Technical conditions for high-temperature testing box
GB10589-89 Technical conditions for low-temperature testing box
GB10592-89 Technical conditions for high and low temperature testing box
B/T10586-89 technical conditions for humidity testing chamber
GB/T2423.1-2001 Low-temperature testing methods
GB/T2423.2-2001 High-temperature testing methods
B/T2423.3-93 Testing Method for humidity Test Chamber
GB/T2423.4-93 Alternating hot and humid testing method
GB/T2423.22-2001temperature testing method
IEC60068-2-1.1990 low-temperature testing method
IEC60068-2-2.1974 high-temperature testing method
Product details
Packing and Shipment:
