Home Companies KOMEG Technology Ind Co., Limited

64L Bench top Climatic Test Chamber With In-hole operation For Calibration

KOMEG Technology Ind Co., Limited
Active Member

Contact Us

[China] country

Address: Building 12, Songshan Lake, Small and Medium-Sized Science and Technology Park, Dongguan City, 523808, Guangdong Province, P.R.China

Contact name:KOMEG

Inquir Now

KOMEG Technology Ind Co., Limited

64L Bench top Climatic Test Chamber With In-hole operation For Calibration

Country/Region china
City & Province dongguan guangdong
Categories Toilet Tissue
InquireNow

Product Details

 
64L Benchtop Climatic Test Chamber With In-hole operation For Calibration Sensor
 
OEM and ODM are welcome 
 
Description : 
 

 

Able to accurately simulate a wide range of complicated natural environments, and is suitable for reliability

 

test in industrial products. Meet GB5170.2.3.5.6-95 standard requirements of environmental testing

 

equipment and test methods for the basic parameters of electric and electronic products under the condition

 

of humidity, low temperature, high temperature, and constant heat.

 
Application : 
 

It is suitable for tests the products of electrical, electronic, mechanical and other products, parts and

 

materials under the conditions of high and low temperature and high temperature and humidity. For quality

 

and reliability test of simulating temperature and humidity changes in electrical, electronic, mechanical and

 

other products, parts and materials.

 

 

 

Specification 

 

Capacity(L)

64L

 

Temperature range

L :-40℃ ~ +150℃ 

R : :-20℃ ~ +150℃  

S:-70℃ ~ +150℃

Temp Deviation

≦ ± 2.0℃

Size 

Workspace volume: W 400 × H 400 × D 400 mm

 

Exterior size: W 600 × H 1550 × D 1220 mm (about)

Temp Fluctuation

±0.5℃

Heat up rate

Heating up rate: -40℃↑ +100℃ about 45min (no-load, ambient temperature +25℃)

 

Cooling rate: 20 ℃to -40℃about 60min (no-load, ambient temperature +25℃)

Humidity range

20%R.H~98%R.H

 

Door

 

Single door, left open. Heating wire was installed at the door frames to prevent

 

condensation at low temperatures.

Humidity uniformity

3.0%RH (no-load)

Load

Product calorific value 1000w

 

Humidifier

Water basin heating and humidification method;

 

Stainless steel sheathed heater;

 

Heater control: no-contact control (SSR);

 

Water level control device, heater anti-dry device

 

Electrical Control System

 

Control cabinet

A. Emergency stop switch

 

B. Power switch

 

C. Over-temperature protection

 

D.RS-485 interface

Protection System

A. Heater protection switch if no water

 

B. Humidifier protection switch if no water

 

C. Heater over-current circuit breaker

 

D. Humidifier over-current circuit breaker

 

Protection System

E. Circulating fan over-current overload protection

 

F. Compressor high voltage protection switch

 

G. Compressor overheat protection switch

 

H. Compressor over-current protection switch

 

I. Over-voltage under-phase protection switch

 

J. Circuit Breakers

 

K. Leakage switch

 

L Low humidifier protection

 

M. Water tank low water level warning

 

Controller noise isolation protection

 

N. Zero-crossing gate fluid power controller

Alarm indicator

Equipment stops running and sends audible alarm when the above protection appears,

 

meanwhile, fault, causes and solutions will be displayed on the screen.

Ambient temp. and humidity

5 ~ 35℃

Power

AC 3ψ4W 380V 50Hz (R, S, T, N plus ground) (voltage fluctuation ≦ ± 10%)

 

Grounding

Grounding resistance≦4Ω

 

Function

Fault alarm and cause handling prompts, power failure protection, the temperature upper

and lower limit protection, timer function (automatic start and automatic stop running), self-diagnostic function.

Network Connection

Can be connected to Ethernet via professional software,

Remote control & assistance function and data collection can be achieved through network,

Multi machine can be controlled simultaneously

Software environment

Windows XP or Windows 7 / WIN8 operating syste


 

Feathers

 

● GB-2423.1-2008 (IEC68-2-1)Test A: Low Temperature Test

 

● GB-2423.2-2008(IEC68-2-2)Test B: High Temperature Test

 

● GJB360.8-2009(MIL-STD.202F) High Temperature Life Test

 

● GJBl50.3-2009(MIL-STD-810D) High Temperature Test

 

● GJBl50.4-2009 (MIL-STD-810D) Low Temperature Test

 

● GB2423.3-2008(IEC68-2-3)Test Ca: Constant Heat Test

 

● GB2423.4-2008(IEC68-2—30) Test Db: Damp Heat Alternative Test

 

● GJBl50.9-2009 (MIL-STD-810D) Damp Heat Test

 

 

 

For more detail information ,kindly contact : anna@komegtech.com  whats app ,wechat :+86-18029096856

 

Photos show 

 

Hot Products

64L Benchtop Climatic Test Chamber With In-hole operation For Calibration Sensor OEM and ODM are ...
Description : 150L Climatic Test Chamber /Environmental Temperature Humidity PJTH For Plastic OEM ...
Programmable Environmental Climatic Test Chamber Precisely Stimulating Temperature Humidity 1. KOMEG ...
64L 150L 225L 408L 800L 1000L 1500L 2000L Programmable Temperature Humidity Test Chamber for mobile ...
150L Programmable Temperature Humidity Test Chamber For LED Life Evaluation Using 1.What we working ...
Climatic Temperature And Humidity Chamber with LCD toch panel Product Application Temperature and ...