Active Member
|
[China]
Contact name:Nancy Shen
Guangdong Sanwood Technology Co.,Ltd |
|
|
Laboratory Landing Type Temperature Chamber
High Low Temperature Test Chamber for Automotive Parts Thermal Cyclic Test
Landing type Temperature Chamber Product Description
Landing Type Temperature (& Humidity) Test Chamber simulating
product under the condition of temperature and humidity combination
(high and low temperature operation & storage, temperature
cycle, high temperature and high humidity, low temperature and
humidity and condensation test, etc.), check whether the
adaptability and characteristics of the product itself have
changed.
Temperature Test Chamber meet standards:
Landing Type Temperature Test Chamber need to meet the requirements of international standard (IEC, JIS, GB, MIL...). in order to achieve International quantum measurement procedures consistency (including test steps, conditions, methods).
GB2423.1-89 test A: low temperature test method
GB/T2423.2-89 high temperature test method
GJB150.4-1986 test at low temperature
IEC60068-2-1 low temperature test method
IEC60068-2-38 temperature cycle
Temperature Test Chamber product advantages:
1.Evaporator no frosting under long time Low temperature running
2.Automatic control system refrigerant demand save electricity
above 30%
3.High heat load tested samples test environment
4.Suitable for large amount specimen and heavy specimen test
5.Customized features available
Temperature Test Chamber technical parameters:
| Model | SM-2520-CC | |
| Temperature | Temperature control | -40℃～120℃ |
| Temperature fluctuation | ±0.5℃ | |
| Cooling rate | 120.0℃～25.0℃ Cooling rate 2.0～3.0℃/min 25.0℃～-40.0℃ Cooling rate 1.0～2.0℃/min | |
| Heating rate | -40.0℃～120.0℃ Within 70 mins 2.0～5.0℃/min | |
| Temperature uniformity | ±2.0℃ (-40.0℃～120.0℃) ±2.5℃ (-40.0℃～-65.0℃) | |
| Humidity | Humidity control range | 20.0%RH～95.0%RH |
| Humidity fluctuation | ±1.5% RH | |
| Humidity uniformity | ±3.0％RH | |
| Material / components | Internal material | Stainless steel(SUS304) |
| External material | Cold rolled steel sheet / powder spraying | |
| Heat insulating material | 100mm thickness polyurethane plate＋10mm thickness mineral wool | |
| Fan | Centrifugal blower | |
| Compressor | Semi-closed Germany Bock, Germany Bitzer | |
| Condenser | Water-cooled | |
| Refrigerant | R404A,R23,R508 | |
| Evaporator | Fin - and - Tube Heat Exchanger | |
| Heater | Nickel chromium alloy heating wire | |
| Humidifier | Steam humidifier | |
| Size | Interior size(mm)W*H*D | 1200x1500x1400 |
| Outer size(mm)W*H*D | 1400x2000x2850 | |
| Volume(L) | 2520L | |
| Power supply | 380V AC 50Hz (or 60Hz) 3 phase | |
| Controller | Standard: Sanwood Customized Controller SH5600 Remote control to PC with software | |
