Active Member
|
[China]
Contact name:Nancy Shen
Guangdong Sanwood Technology Co.,Ltd |
|
|
Rapid Temperature Change Environmental Street Screening Testing Chamber
ESS Test Chamber for Aerospace Reliability Test
Rapid temperature change test chamber product introduction
Rapid temperature changes (damp heat) test chamber is suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature circulating and temperature stress screening (ESS) test, and constant humidity and cyclic damp heat test. This type of machine mainly used to simulate the product in climate conditions, a temperature and humidity conditions or at ambient temperature and humidity conditions, detecting the product features and the adapt change ability. It’s the aviation, automobiles, home appliances, research and other fields necessary test equipment.
SANWOOD rapid temperature change test chamber advantages:
1.Can set the temperature variable rate of the different stress
screening
2.Can perform a rapid temperature change (ESS), condensation test,
high temperature and humidity test, temperature and humidity
cycling test, etc.
3.Meet the requirements of stress screening test for electronic
equipment
4.Switching temperature and average temperature these two kinds of
test methods
5.Can set a variety of stress screening (fast temperature change
rate) 5deg C/min, 10deg C/min, 15deg C/min experimental conditions
6.Meet the requirements of stress screening test for electronic
equipment MIL-STD-2164, MIL-344A-4-16, MIL-2134A-19, NABMAT-9492,
GJB-1032-90, GJB/Z34-5.1.6, IPC-9701....ETC.
7.Can carry out the two test methods, temperature test and average
temperature test
8.With aluminum sheet test machine load capacity (non plastic load)
9.Single machine can perform fast temperature change (ESS),
condensation test, high temperature and humidity test, temperature
and humidity cycling test, etc.
10.Can screen the sample load with a large number
11.Built in two-way USB2.0 portable storage interface (can copy the
test curve and load the test program)
12.Complete real-time test curve analysis shows that no time limit
13.Can be integrated with the E management system to monitor the
management system
14.Multi-language selection: Chinese, English, Russian, Korean,
Japanese, German multilingual language switching.
Rapid temperature change test chamber accessories:
1.Standard equipment
Test product load power supply 3 groups
Each side of the left and right side has a 50mm Pin hole
Pin hole silicone plug 2 PCS
Stainless steel sample holder 2 PCS
20L water storage tank 1 PCS
Pure water filter 1 PCS
Rapid temperature change test chamber Specification:
| Model | SM-KS-408-CC | SM-KS-800-CC | SM-KS-1000-CC | SM-KS-1500-CC | |
| Temperature | Temperature control range | -70℃～180℃ (A:5℃/min;B:10℃/min；C:15℃/min;D:20℃/min) | |||
| Temperature fluctuation | ±0.5℃ | ||||
| Cooling rate | 155.0℃～-65.0℃ (linear or nonlinear:5.0℃,10.0℃,15.0℃,20.0℃/min) | ||||
| Heating rate | -65.0℃～155.0℃ (linear or nonlinear:5.0℃,10.0℃,15.0℃,20.0℃/min) | ||||
| Temperature uniformity | ±1.5℃ (-40.0℃～100.0℃) | ||||
| ±2.0℃ (100.1℃～180.0℃or-40.0℃～-70.0℃) | |||||
| Humidity | Humidity control range | 10.0%RH～98.0%RH(60℃ above corresponds to 10%RH) | |||
| Humidity fluctuation | ±1.0% RH | ||||
| Humidity uniformity | ±2.0％RH | ||||
| Material / components | Internal material | Adopts 1.2mm thickness stainess steel(SUS304) | |||
| External material | Adopts 1.5mm thickness Cold rolled steel sheet / powder spraying | ||||
| Heat insulating material | 100mm thickness polyurethane plate＋10mm thickness mineral wool | ||||
| Fan | Centrifugal blower | ||||
| Compressor | Semi-closed Germany Bock, Germany Bitzer | ||||
| Condenser | Air cooling, water cooling | ||||
| Refrigerant | R404A,R23,R508 | ||||
| Evaporator | Fin - and - Tube Heat Exchanger | ||||
| Heater | Nickel chromium alloy heating wire | ||||
| Humidifier | Steam humidifier | ||||
| Size | Interior size(mm) W*H*D | 800*850*600 | 1000*1000*800 | 1000*1000*1000 | 1200*1000*1250 |
| Volume(L) | 408L | 800L | 1000L | 1500L | |
| Operating ambient temperature | +5 ~ 35℃ | ||||
| Power supply | 380V AC 50/60Hz | ||||
| Controller | Standard: South Korea TEMI-1500 Optional: South Korea TEMI-2500,South Korea TEMI-2700 | ||||
