Active Member
|
[China]
Address: No. 7, 1/F, Bldg. C, Jinhui Industrial Park, Jiuxibian Village, Lixin Community, Dongcheng Dist.
Contact name:Doris
ASLi (CHINA) TEST EQUIPMENT CO., LTD |
|
|
High Acceleration Shock Tester is mainly used for small products
for impact test, to assess the product’s ability to withstand shock
damage. It is often used in electronic components, electronic
circuit boards and other environmental testing.
Features of 30ms Pneumatic Shock Testing Equipments For Electronic Products Impact Testing
1. Working bench with perfect structure, good uniformity of bench's
acceleration.
2. High reliable of system, safety device.
3. The saw-tooth wave and trapezoidal wave, etc. extensible.
4. Capacity of crash and impact test function.
5. Optoelectronic feedback.
Technical Parameters about 30ms Pneumatic Shock Testing Equipments For Electronic Products Impact Testing:
| Model | SS-5 | SS-10 | SS-25 | SS-50 | SS-100 | SS-200 | SS-400 | |
| Load Capacity (Kg) | 5 | 10 | 25 | 50 | 100 | 200 | 400 | |
| Table Size (mm) | 120x120 | 200x200 | 350x350 | 450x450 | 650x650 | 750x750 | 850x850 | |
| Pulse Acceleration (m/s2) | Half Sine Wave | 150~15000 | 150~15000 | 150~15000 | 150~6000 | 150~6000 | 150~3500 | 150~1500 |
| Trapezoid Wave | 300~1000 | 300~1000 | 300~1000 | 300~1000 | 300~1000 | 300~1000 | 300~500 | |
| Sawtooth Wave | 150~1000 | 150~1000 | 150~1000 | 150~1000 | 150~1000 | 150~1000 | 150~500 | |
| Pulse width | Half Sine Wave | 0.5~18 | 0.6~18 | 0.8~25 | 1.5~30 | 1.5~30 | 2~30 | 6~30 |
| Trapezoid Wave | 6~12 | 6~12 | 6~18 | 6~12 | 6~12 | 6~12 | 6~12 | |
| Sawtooth Wave | 6~18 | 6~18 | 6~18 | 6~18 | 6~18 | 6~18 | 6~18 | |
| Drive Mode | Mechanical drive | Hydraulic drive | ||||||
| External Dimension WxHxD (mm) | 800x2200x900 | 800x2200x900 | 850x2250x950 | 1000x2600x1300 | 1100x2700x1400 | 1300x2700x1600 | 1300x2700x1650 | |
| Weight (Kg) | 600 | 700 | 900 | 2600 | 3300 | 4000 | 4500 | |
| Hydraulic Oil | No #46 hydraulic oil | |||||||
| Power | AC 380V 50/60HZ | |||||||
Shock Control system is used for shock test machine series.Which
adopted USB2.0 connect and communication with PC to transfer
control instruction for measurement data , based on Windows
operating system combined with a measurement system to realize
automatic test. With the following functions: To control gas flow
rate, gas pressure ; (Big model and high technical parameters
required) To control pneumatic valve reversing and on-off ; (Big
model and high technical parameters
required) To Measure lifting height
Package about impact tester:
PP film first, and then 10mm foam between machine and the case, and outside is standard export plywood case.
Warranty: one year free warranty for whole set machine,lifelong time maintainance.
Service:OEM service,Design service,Buyer lable service.
After-sale service: feedback within 2 hours after get the call.
Short introduction about ASLi factory:
We are a long history testing equipment manufacturer, in the past
25 years, we devoted to simulation environmental testing equipment
and Mechannical vibration and shock testing machine.HAST
Un-Saturated Steam Chamber is our star products, and we had
obtained the CE certification for this machine.
