Pleated filters are extremely versatile allowing installation in
virtually any application or air-handing system. They are widely
used in build up filter banks, central station air handlers,
rooftop units and side access housing.
AngryGuard pleated filters commonly used as prefilters to protect
and extend the life of the final filter in a housing unit. The use
of a prefilter is highly recommended as the easiest and most
economical way of improving final filter performance.
Galvanized Steel Pleat Support-Prevent Rust- How many pleats have
you seen with rust flaking off the grid? The HD expanded metal
pleat support grid is made of galvanized steel for maximum rust
resistance. The metal grid maintains pleat shape and prevents
fluttering in operation. Consistent pleat shape minimizes
resistance and improves dirt loading characteristics throughout the
life of the filter.
100% Adhesive Application-Ensures Filter Integrity- The inside of
the die cut frame is completely coated with adhesive to ensure a
solid bond at all points of contact. The die cut boxes are bonded
to reach other. The media pack is sealed inside the frame and the
pleat tips are
bonded to the diagonal support members.
Two-Piece Frame Construction-Double-wall thickness around the outer
edge and integral die cut members provides strength and rigidity.
HD filters will not rack, warp or bend under normal handling or
operating conditions.
Advantages:
• Excellent prefilter for higher efficiency filters
• Excellent primary filter to prevent dust build-up on heating
• an cooling coils, fans, and ductwork
• High-loft synthetic media
• Four Efficiencies range from MERV 6, MERV 7, MERV 9
• 1" , 2" and 4" models
• Premium performance and construction
• For simple storage, installation, handling and removal
• Each filter includes a label noting tested efficiency,pressure
drop,rated airflow
Parameters & Material:
- Frame: Die cut cardboard / Aluminum / Galvanized steel
- Media: high lofted synthetic fiber
- Gasket: Neoprene ( available on request)
-Max.Constant Temperature: 80ºC (170ºF)
- Recommended Final Resistance: 200Pa ( 0.8" W.G)
- Flammability: UL Classified
- Relative Humidity: 100%
