Results forclause 20 2 test probefrom 29 Products.
|
Test probe similar to test probe B of IEC 61032 with circular stop face Ø50 mm , IEC 60335-1 Test probe B According to IEC60335-1- clause 20.2. Test probe similar to test probe B ...
|
|
|
|
Test probe similar to test probe B of IEC 61032 with circular stop face Ø50 mm , IEC 60335-1 Test probe B According to IEC60335-1- clause 20.2. Test probe similar to test probe B ...
|
|
|
|
Flat Probe as per EN 60598-2-20 clause 20.12.3 This flat probe, 0.5 mm thick and 8 mm wide, with a rounded tip having a radius of 4 mm. It shall not be possible to touch live parts ...
|
|
|
|
(1) The rod has a diameter of 8,0 mm ± 0,1 mm and unlimited length (2) cylindrical rod having a diameter of 40 mm and a hemispherical end
|
|
|
|
IEC60335-1 Clause 20.2 Test Probe With 50mm Circular Stop Face/ Finger Length 80mm Compliance is checked by inspection, by the test of 21.1 and by applying a force not exceeding 5 ...
|
|
|
|
IEC60598-2-20 clause 20.11.2. Flat Probe Product information: This flat probe conforms to IEC60598-2-20 clause 20.11.2. It is used for testing the string lights which can not make ...
|
|
|
|
IEC60335-2-14 Test Probe With Diameter 125mm Circular Stop Face, Probe Length 100mm Standard of Test Finger Probe: IEC61032 figure 2 test probe B, IEC60335-2-14 clause 20.2. ...
|
|
|
|
IEC60335-2-14 Test Finger Probe B With 125mm Diameter Circular Stop Face Standard description: For blenders, detachable parts, except lids, are not removed. The test is carried out ...
|
|
|
|
Φ8mm Cylindrical Rod Test Probe for Blender as Per IEC60335-2-14 clause 20.102 1. Introduction The Φ8mm cylindrical rod test probe is designed to meet the test requirements of ...
|
|
|
|
Similar Test Probe B with 50mm Circular Stop Face IEC60335-1 Clause 20.2 1. Introduction The probe is similar to test probe B of IEC61032 but having a circular stop face with a ...
|
|
|
|
IEC 60335-1 Clause 20.2 Similar to Test Probe B but Having a Ф50mm Circular Stop Face Standards & Clauses: IEC 60335-1 clause clause 20.2. IEC61032:1997 “Protection of persons and ...
|
|
|
|
IEC 62368-1 Clause V.1.2 and Figure V.2 Jointed Test Probe for Equipment Product information: This is a precision test finger made in accordance with many standards like IEC 62368...
|
|
|
|
IEC 61851-1 Figure V.2 Jointed Test Probe For Electric Vehicle Conductive Charging System Test Product information: This is a precision test finger made in accordance with IEC ...
|
|
|
|
IEC 60065:2014 Clause 9.1.7 Enclosure Openings Unjointed Test Probe 11 Product Overview: This probe conforms to the standard requirements of IEC 60065:2014 clause 9.1.7, IEC61032 ...
|
|
|
|
Steel Test Pin with Nylon Handle as Per BS1363-1 Figure 1 1. Introduction The test pin meets the requirements of BS1363-1 clause 12.6.1 and figure 1.The test pin meets the ...
|
|
|
|
Abration Resistance Test Pin Made by Hardened Steel Conforms to IEC60950 1. Introduction The scratch resistance test uses a hardened steel pin for scratching. The end of the steel ...
|
|
|
|
IEC60335-2-14 Hand-held blenders φ40 mm Cylinder Rod Test Probe Standard and Application: The φ40mm cylinder rod meets the standard requirements of IEC 60335-2-14 Clause 20.103. It ...
|
|
|
|
IEC 61032 Figure 2 Jointed Probe For Equipment And Persons Enclosures Protect Product information: The joint test probe of figure V.2 is in accordance with many standards like IEC ...
|
|
|
|
IEC 62196-1 Gauge“A”Guage“B”for Checking Shutters 20N 1N Test Probes Product information: These two test gauges separately confirm to the IEC 62196-1Ed.4CDV 2020 clause 10.2, ...
|
|
|
|
Household Appliance Test Equipment Test Probe With 125mm Diameter Stop Face Standard: IEC 60335-2-14 Household and similar electrical appliances – Safety – Part 2-14: Particular ...
|
|
|
You may also be interested in :