Active Member
|
[China]
Address: No.36 Changsheng south road，Jiaxing，China
Contact name:Song Yu
ZEGOTA Precision Technology Co.,LTD |
|
|
Ultra thin copper clad steel clad copper with high performance cost ratio and high extensibility
Copper clad steel clad copper belongs to the combination of non-ferrous metal and steel. It has superior properties in strength, weld ability, heat conduction, lubrication and bending resistance. ZEGOTA uses innovative technology, high-end equipment and high-quality raw materials to develop and produce high quality copper clad steel sheet/strip with leading high ductility, high combination rate and ultra-thin clad.
Advantages:
1. Ultra thin: By using the unique composite technology, the single-layer clad with 0.01mm thickness can be compounded with 0.03mm base metal, the total thickness can be up to 0.05mm, and the multi-layer clad can be made.
2. High strength: Using unique clad technology and taking advantage of the high strength of steel, while copper is soft, the combination of the two can make full use of its advantages, which clad a special material.
3. High extensibility: Because copper is soft and excellent ductility, copper clad steel with 35% elongation improvement can be achieved by combining copper and steel together.
Parameters:
| Clad material | Copper | Copper | Copper |
| Steel | Steel | Steel | |
| Copper | Copper | Copper | |
| Thickness(mm) | 0.01-4.0 | 0.04-4.0 | 0.01-4.0 |
| Width(mm) | 5.0-1500 | 5.0-1500 | 5.0-1500 |
| Tensile strength(MPa) | 260-320 | 480-580 | 480-580 |
| Yield strength(MPa) | 200-260 | 300-380 | 300-380 |
| Elongation(%) | ≥37 | ≥15 | ≥15 |
Application:
1. Military Industry: Copper clad steel is used to replace the shell made of traditional steel and copper, which not only guarantees the original performance, but also has the characteristics of corrosion resistance and good surface lubrication.
2. Electronic industry: There are many gaskets in electronic components, which require strong and thin. Copper clad steel can meet various innovative design requirements.
3. Cookware: In the manufacture of cooking utensils, a lot of extrusion deformation is needed. Copper clad steel has good strength and ductility, which greatly improves the processing efficiency of products.
