|
[China]
Trade Verify
Address: No.A1507H2 Xinhe Century Building, 3069 Caitian Rd, Gangxia Community, Futian District, Shenzhen City, China
Contact name:Ricky Zou
RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD |
|
Verified Suppliers
|
|
|
3.96mm pitch wire to board also battery terminal connectors A type precise alternatives
1, The product specification
Through the next datasheet, you will have a good understanding for our product. Besides, the interrelated
product of this part like terminals, wafer(right angle or vertical) can be offered by us too.
| Basic size information | |||
| Color | White | ||
| Material | Nylon66 | ||
| Row | Single | ||
| Pitch | 3.96mm | ||
| Flammability | UL94V-0 | ||
| Wire range | A3961T series | ||
| Terminal processing method | E-stamping before tin-plated | ||
| Part No. | A3961HA-NP | ||
| Electrical properties | |||
| Current Rating | 7A AC, DC | ||
| Voltage Rating | 250V AC, DC | ||
| Contact Resistance | 10mΩ Max | ||
| Insulation Resistance | 1000mΩ min | ||
| Withstanding Voltage | 1500V AC/minute | ||
| Mechanical properties | |||
| Temperature range | -25℃ to 85 ℃ | ||
| Other information please kindly check the following picture. | |||
2, Related drawing and report
You can get more characteristics from below picture, through this, you can know our product very clearly.
Mechanical Performance
| Test Description | Procedure | Requirement | ||
| 5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw actuator at the speed rate of 25±3mm / minute. | Refer to paragraph 7 | |
| 5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#18 | 9.0 kgf (Min.) |
| AWG#20 | 6.0 kgf (Min.) | |||
| AWG#22 | 4.0 kgf (Min.) | |||
| 5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 1.50 kgf (Max.) | |
| 5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. | 3.00 kgf (Min.) | |
| 5-5 | Pin Retention Force | Apply axial pull out force at the speed rate of 25±3mm / minute. | 3.00 kgf (Min.) | |
| 5-6 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. | Contact Resistance 20mΩ (Max.) | |
| 5-7 | Vibration | Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) | Appearance No Damage. Contact Resistance 20mΩ (Max.) Discontinuity 1 μsec.(Max.) | |
| 5-8 | Physical Shock | 490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) | ||
3, Product's featurs
This small, field-proven connector for printed circuit boards
is reliable and has a large current carrying capacity. It can
be used with a wide variety of signal, power supply, and
output circuits that appear in
consumer electronic products.
· Proven box contact
· Compact connector with a large capacity
· Secure contact and mounting
4, Our strength
