Laboratory Inspection RT Cigarette Filter Rod Test Station N6 Pieces/Min

Production workshop laboratory inspection station filter rod sampling available filter rod multifunctional tester

Chengdu Retool Science & Technology Co., Ltd.,

The tester is used to measure the weight, circumference (roundness), length, suction resistance, ventilation rate, hardness and other physical parameters of cigarette and filter rod. RT series Cigarette. Filter-Rod multifunction tester adopts modular combined design, with high degree of automation. Each test unit carries out automatic measurement independently and synchronously, and is compatible with samples of various specifications, including conventional cigarettes, medium cigarettes, fine cigarettes, special cigarettes, heated non combustible cigarette rolls, ordinary filter rods, medium filter rods, fine filter rods and special filter rods, It can be combined into comprehensive test bench products of different measurement items according to the actual needs of users.
 
Performance and characteristics

1. Function of the whole machine: detecting the physical indexes of various cigarettes and filter rods, Including weight, circumference, roundness, length, suction resistance (open and closed), ventilation rate, hardness, etc.
2. Modular design, drawer-type structure, can combine different units according to needs, and can also turn off or turn on the specified detection function;
3. Panel unit layout, beautiful and generous, easy to observe the measurement process, troubleshooting, etc.;
4. Feeding device: automatic roller hopper with independent intellectual property rights, Automatic switching of coarse, medium and fine gears according to the brand of software samples;
5. Weighing unit: imported precision balance (with anti-electromagnetic interference function) is adopted. Built-in automatic calibration function, automatic peeling in the measurement process (to avoid dust and other impurities interference); Equipped with electronic level, it is convenient to adjust the levelness of the instrument and avoid the error of calibration and measurement;
6. Circumference unit: adopting mechanical clamping device, aiming at the height stepless adjustment device of special filter rods, and based on patent and proprietary technologies such as double-angle positioning of hardware and software, transparent filter rods can be detected;
7. Length unit: mechanical clamping device is adopted. After the first calibration, Height reference positioning device without repeated calibration for brand switching;
8. Resistance absorption unit: patented technologies with intellectual property rights, such as valve island, wedge seal, temperature and humidity monitoring, built-in standard bar for automatic calibration of measurement data, antistatic, etc.; Test pipeline pressure drop < 10Pa, which meets the requirements of national standard;
9. Hardness unit (air bearing): Advanced technologies such as weight direct vertical pressure, zero friction technology of air bearing and laser non-contact measurement is adopted to ensure that the pressure meets the national standard requirements. Automatic sample centering, the measurement position can be set in a stepless and wide range;
10. Control system: the control computer is a 15-inch industrial tablet, the operating system is windows 7, and the computer side is hung on the left side of the instrument;
11. Data output: It has its own wide-width thermal printer, network interface and USB interface, and has the ability to upload data;
12. External alarm lamp with light alarm prompt function;
13. Gas source: industrial power source with high anti-interference ability; Equipped with oil-water separator and precision filter to strengthen gas source purification treatment.
14. Maintenance: Built-in remote diagnosis and maintenance function.

Key technical indexes
 
1. Sample length range: 55〜150mm
2. Circumferential range of sample: 15.5-28.5mm
3. Capacity of hopper: > 50 pieces
4. Working speed: n6 pieces/min (excluding hardness test)
5. Sample collection: random collection, more than 200 pieces.
6. Distance between hardness test point and sample end face: 0-75mm, Distance between the test point and the end face of the sample: 47-119mm (including 2-in-1)
7. Conventional measurement indicators:

 
CFO constant current hole (17.5±0.1 ml/s) made of imported gemstones ensures constant flow,
The measurement accuracy of CFO hole in the pipeline is 17.5 ± 0.1 ml/s;
* Product parameters may change according to the actual situation without prior notice.
 

Equipment size

L×W×H:0.6×0.6×1.4m(short chassis), 0.6×0.6×1.6m(high chassis),excluding alarm lights and computers.

Comprehensive test bench for short cigarettes (refer to conventional comprehensive test bench for indexes not listed):
 
Sample length range: 40~150mm
The distance between the measuring point and the end face of the sample is 46-115mm,
The distance between the hardness test point and the end face of the sample is 0〜45mm for the circumference and length unit.

Why choose us? Our advantages

Accuracy: The test results are accurate and can provide accurate tobacco composition data.

Reliability: The equipment has high stability and reliable test results, which can meet various testing requirements.

Efficiency: High degree of automation, fast test speed, improve work efficiency.

Comprehensiveness: Can test a variety of tobacco components, including nicotine, nicotine, niacin, etc., to meet different customer needs.

High precision: The use of advanced detection technology, high precision, small error.

AFTER Sales service

1. Video guide for debugging and use.

2. One-year warranty.