Active Member
|
[China]
Address: NO.8 HongYe Road,West Hehuan Street,High-Tech Development Zone, Zhengzhou,China.
Contact name:Sara
ZhengZhou HengXing Heavy Equipment Co.,Ltd. |
|
|
Gold Ore Extraction Flotation Machine Plant
Flotation machine as one of the most widely used mineral processing equipment, mainly using the chemical and physical properties of the mineral surface, with the aid of air bubbles' buoyancy from the pulp realize mineral separation process. In the ore dressing and metallurgical operation, it is very suitable for the selection of copper, zinc, gold and other non-ferrous metals, and also suitable for the coarse separating and fine separating of black metal and non-metal.
The flotation separator consists of slurry tank, mixing device, inflating device, discharging mineralized foam device, motor and so on.
Slurry tank: It has the inlet of the slurry, and the gate device for regulating the slurry, which is mainly composed of the channel welded with steel plate and the gate welded with the round steel.
Mixing device: It is used to stir the ore pulp to prevent the deposit of ore sand in the tank body, which consists of pulley, impeller, vertical shaft, etc. The impeller is made of wear-resistant rubber.
Inflating device: It is made up of inlet duct, when the impeller rotates, negative pressure is formed in the impeller chamber and absorb the air which through the hollow pump line, and then these air dispersion in the slurry forming bubble group. The pulp with a large number of air bubbles by the rotation of the impeller force and was soon thrown to the stator, further making bubbles in pulp refining, and eliminate the rotation of the pulp flow in the flotation cell, resulted in a large number of micro bubble raising vertically, providing the necessary conditions for the flotation process.
Discharging mineralized foam device:, The motor drives reducer and the reducer drives the scraper blade, meanwhile, the scraper blade will scrape the foam floating on the trough.
Hengxing flotation machine features:
High flotation efficiency and low power dissipation;Each flotation tank has the triple function of suction air, suction pulp and flotation, the whole flotation cell is self-forming circuit and has high production efficiency.
Suitable for wide range of materials and convenient operation;The ore pulp cycle of flotation is reasonable, even coarse mineral can be process well, the design of its electric control device is convenient for adjusting the ore pulp surface level.
Easy to maintain wearing parts;The flotation cell's impeller with high strength alloy material is wear-resisting and corrosion resistant, and it's easy to replace and shorten engine's downtime.
Multiple models can be selected and supporting customization;The design of flotation separator and the selecting of efficient flotation reagent are according to the material's characteristics to reduce the cost of customer's investment.
Flotation machine technical specifications:
| Category | Specification Model | Effective cubage (m³) | Processing capacity (m³/min) | Main shaft loam board | Dimensions (L×W×H) (mm) | Single trough Weight (t) | |||
| Power (kw) | Rotate speed (r/min) | Rotate speed (r/min) | Power (kw) | ||||||
| XJK type flotation machine | XJK-0.35 | 0.35 | 0.18-0.4 | 1.5 | 483 | 25 | 1.1 | 700×700×700 | 0.5 |
| XJK-0.62 | 0.62 | 0.3-0.9 | 3.0 | 400 | 25 | 1.1 | 900×820×850 | 1.0 | |
| XJK-1.1 | 1.1 | 0.6-1.6 | 5.5 | 330 | 25 | 1.1 | 1100×1100×1000 | 1.4 | |
| XJK-2.8 | 2.8 | 1.5-3.5 | 11 | 280 | 25 | 1.1 | 1750×1600×1100 | 2.5 | |
| XJK-5.8 | 5.8 | 5-7 | 22 | 240 | 25 | 1.5 | 2200×2200×1200 | 3.6 | |
| SF type flotation machine | SF-0.37 | 0.37 | 0.2-0.4 | 1.5 | 386 | 25 | 1.1 | 700×700×750 | 0.5 |
| SF-0.7 | 0.7 | 0.3-0.9 | 3 | 400 | 25 | 1.1 | 900×820×950 | 1.0 | |
| SF-1.2 | 1.2 | 0.6-1.6 | 5.5 | 330 | 25 | 1.1 | 1100×1100×1100 | 1.9 | |
| SF-2.8 | 2.8 | 1.5-3.5 | 11 | 268 | 25 | 1.1 | 1750×1600×1150 | 2.6 | |
| SF-4 | 4 | 2-4 | 15 | 220 | 25 | 1.5 | 1850×2050×1200 | 2.9 | |
| SF-8 | 8 | 4-8 | 30 | 191 | 25 | 1.5 | 2200×2900×1400 | 4.2 | |
| SF-10 | 10 | 5-10 | 30 | 191 | 25 | 1.5 | 2200×2900×1700 | 4.5 | |
| SF-20 | 20 | 5-20 | 30×2 | 191 | 25 | 1.5 | 2850×3800×2000 | 9.9 | |
| JJF type flotation machine | JJF-2 | 2 | 1-3 | 7.5 | 443 | 25 | 1.5 | 1400×1400×1100 | 1.7 |
| JJF-4 | 4 | 2-4 | 11 | 305 | 25 | 1.5 | 1600×2150×1250 | 2.4 | |
| JJF-8 | 8 | 4-8 | 22 | 233 | 25 | 1.5 | 2200×2900×1400 | 4.5 | |
| JJF-10 | 10 | 5-10 | 22 | 233 | 25 | 1.5 | 2200×2900×1700 | 4.9 | |
| JJF-16 | 16 | 5-16 | 30 | 180 | 25 | 1.5 | 2850×3800×1700 | 8.0 | |
| JJF-20 | 20 | 5-20 | 37 | 180 | 25 | 1.5 | 2850×3800×2000 | 10.5 | |
Flotation plant case :
Sale services
Our experienced technicians is available on the phone also the internet, clients can get instance guidance
by telephone, email, online service anytime, anywhere. As clients’ request, we will send technician to the
mine site to guide the installation, trial run test, and training operators until the plant works normally.
-After-sale services
Normally, the equipment warranty is 18 months since installation, but can extend as long as 24 months as
the clients’ request. Equipment spares will be offered with manufacturing cost in at least 10 years since
the order is placed. To establish long term cooperation, we will regularly call and email our clients, to
check the equipment working condition, offer suggestions for maintenance,and if necessary we will pay
a visit to clients to solve the problems caused during equipment working.
