a kind of new printing pen robot 3d drawing pen with 1000mah built in power and external power

a kind of new printing pen robot 3d drawing pen with 1000mah built in power and external power

Item No. : LR03 3D pens

Our 3D pen is one of the 3D drawing pen favorites due to its impressive character, affordable price and great support and warranty. If you are looking for the best 3D printing pen to start the 3D printing craft, this will be a perfect choice.

This kind of new 3D pens with 1000mAh built in power.

Features:

The 3D Pen for freehand drawing of 3D objects

0.6 mm Nozzle and Uses PCL 1.75mm Plastic Material

Ergonomic design for optimum handling

Adjustable output speed, Durability

In many paint colors: filament is changed easily by pressing a button

LED indicator to check the operating temperature

How to work:

Full of power with green light.

Long press the feed key to boot with voice prompt and the light becomes to red, then it is into heating state. When the red light becomes to blue light, it means heating completed. Please watch out for pen burns.Then press the feed button once and motor can start loading work.

This machine sets up two files, controlled by feed key.

When in use, press the feed button to release the feed. Press the pause again, synchronized voice prompts (feed, pause), function loop.

When in use, press twice to enter the speed adjustment mode. Voice same step-tip (fast, slow), functional loop.

In the pause state, press the backup key to synchronize the speech prompt(Backup),initiating the feed-back procedure, auto stop after rewind.

Shut down: long press back buttons 3 seconds ,then with the voice of “beep”

If it does not work for about 80seconds into dormant state, turn off after the green light “beef”.

Advantage for built in power robot 3D pen:

1. Global first intelligent 3D pen with voice broadcasting

2. Two buttons to control all

3. One button to unload filament for 15s

4. Be powered by built in power or external power

5. Fully charged battery can work for 2 hours

Specification:

Packing List:

3D robot pen 1pc
adapter 1pc
USB line 1pc
pen holder 1pc
PCL 5m
manul 1pc

Warm tip:

1. Near the end of the 3D pen is high temperature danger zone. Please do not to touch it!

2. Please ensure the supplies port level when you replace the material.

3. Please do not spray water.

4. When you order 3D pen, be sure to order more filament. ( You can find the filament details and price in our store)

It will be sent by DHL,FedEx, EMS, IE etc. express if the parcel is over 2kg