Active Member
|
Address: Shijiazhuang, Hebei, China
Contact name:Ma xueyi
Hebei YUBO Filtration Equipment Co., Ltd. |
|
Product Brief Description
Automatic backwash filteris an advanced, efficient and easy to operate automatic filter. The filter is composed of tank body, stainless steel filter screen, sewage part, transmission device and electrical control part. When the filter operates, the water to be filtered enters through the water inlet, flows through the filter screen, enters the pipeline required by the user through the outlet for process circulation, and the particles in the water are trapped inside the filter screen. At the same time, the blowdown outlet is opened and discharged from the blowdown outlet. When the filter screen is cleaned, the pressure difference is reduced to the minimum value, the system is returned to the initial filtering state, and the system is in normal operation.
Product Details (Core Parts)
Product Features:
1. The automatic backwash filter has the characteristics of simple structure and easy disassembly.
2. Directly installed on the pipe network system, without any support structure, saving space.
3. The investment cost is saved. In the installation process, there is no need to use multiple bypass pipelines, which reduces the labor intensity and avoids the removal and drainage during the adjustment test and maintenance.
4. Flexible installation, horizontal installation and vertical installation.
5. Resistance of filter at rated flow rate is 0.05~0.1m water column.
6. The filter screen cylinder is fixedly connected to the pipe body as a whole, with rigidity, good strength, no wearing parts and long service life.
7. Specification of filter screen:10 mesh/inch,14 mesh/inch,20 mesh/inch, can also be customized according to user requirements.
Product specification parameters
| Model | BSRF300 / BSRF400 / BSRF500 / BSRF600 / BSRF700 / BSRF800 / BSRF900 / BSRF1000 |
| Applicable liquid | Water and low viscosity liquid (<40 cps), impurities <300 ppm |
| Operating differential pressure | Pressure difference between outlet and blowdown pipeline >0.15MPa |
| Filter precision | 50-2000μM |
| Standard Design Pressure Rating | 0.6MPa/1.0MPa/1.6MPa/2.0MPa, higher pressure can be customized |
| Design temperature | 0-95℃ |
| Flow Range | 15-8000M3/h |
| Filter area | 4970Cm2-89530cm2 |
| Inlet/outlet connection standard | 0.05MPa-0.07MPa |
| Control system | Pressure difference and time parallel dual control mode |
| Differential pressure transmitter | Pressure differential transmitter or pressure differential switch |
| Motor reducer | 120W, three-phase,380V, protection grade IP55; worm gear reducer |
| Inlet and outlet dimensions | 2"~24" |
| Inlet/outlet connection standard | Flange,ANSI B16.5 |
| Filter element type material | V-shaped wedge mesh, material 304/316 L/2205/ titanium |
| Material of shell connecting liquid | 304/316L/CS, special material customizable (e.g.904L, duplex stainless steel) |
| Internal surface anticorrosive coating | Epoxy coating, PA11(for carbon steel or special corrosion protection requirements) |
| Shell sealing material | NBR Nitrile (Standard)/ Viton (FKM) Viton |
| Blowdown valve | Pneumatic stainless steel ball valve or butterfly valve, protection class IP65 |
| Utility Supply Requirements | 0.4-0.6MPa clean dry compressed air, 380V AC, 24V DC |
Product working principle
Internal structure diagram of backwash filter
The filtered liquid enters the filter from the inlet, enters the filter through the lower fixing plate, the liquid flows from the inside of the filter to the outside, and flows out of the filter from the outlet of the filter cartridge, and the impurities discharged from the backwash are discharged from the drain outlet
Solid particles are trapped inside the screen as the liquid flows from the inside to the outside. As the contamination increases, the differential pressure between the contaminated side and the clean side of the filter increases. When the differential pressure reaches the set value, the differential pressure gauge sends a message and the filter starts the automatic backwashing process.
Backwash process:
1. The reduction motor drives the flushing arm to rotate through the intermediate shaft to align it with the cleaned filter screen;
2. Open the blowdown valve to make the pressure difference between the outside of the cleaned filter screen (clean side) and the blowdown;
3. Under the action of pressure difference, the liquid flow at the cleaning side flows from the outside to the inside of the cleaned filter screen for backwashing, and the pollutants accumulated in the inside of the filter screen are washed away and discharged from the filter through the drain outlet;
4. The backwash time of each filter screen has been set. When the backwash time is reached, the blowdown valve is closed, the backwash process of the filter screen is completed, the reduction motor drives the backwash arm to rotate again, the next filter screen is backwashed, the blowdown valve is opened again, and so on to backwash each filter screen;
5. After all filters are cleaned, the flushing arm returns to the original position under the control of the photoelectric switch, and a backflushing cycle ends;
6. Since backwashing is the flushing process of a group of filter screens, the filter can still maintain the continuous filtering state of liquid flow during backwashing.
Product Advantage
Backwash filteris an indispensable treatment method in the process of water purification, which is used to intercept impurities in the water to purify water quality or protect the normal operation of other equipment in the system. When the traditional filter works, the equipment must be disassembled to realize the cleaning of the filter part, and the filter state can not be monitored. Moreover, it is greatly affected by human factors, so that the automation degree of the whole system is very low. When the backwash filter is cleaned and drained, the uninterrupted water supply of the system has the advantages of high automation degree, large treatment capacity, self-cleaning and drainage, uninterrupted water supply, wide application area, etc.
Product application
It is widely used in the fields of metallurgy, chemical industry, petroleum, papermaking, medicine, food, mining, electric power and urban water supply. Such as industrial waste water, filtration of circulating water, regeneration of emulsion, waste oil filtration treatment, continuous casting water system in metallurgical industry, high furnace water system, high pressure water descaling system for hot rolling.
