Shijiazhuang CanChun Pump Tech Co.,Ltd |
|
1.General
gear oil pump in the oil system can be used as a transport, booster pump;In the fuel system can be used as a transport, pressure, jet fuel pump;In all industrial areas, can be used as lubricating oil pump.
Gear pump are mainly gear, shaft, pump body, valve, shaft end seal. Gear after heat treatment with high hardness and strength, and shaft installed in the replaceable shaft sleeve. In all parts of the lubrication pump are pump work automatically to achieve using the output media.
Pump is equipped with safety valve as overload protection, the total reflux pressure relief valve is rated pump out pressure of 1.5 times, also can allow discharge pressure range according to actual needs and adjust. But note that this cannot be a long-term work pressure reducing valve, relief valve can be installed in the piping shall be separately when necessary. To pump from the main shaft overhang end
to see, for clockwise.
2. Performance range
Flow raste:1m3/h-600m3/h
Traffic:1.1 m3 / h -600 m3 / h
pressure: 0.28 MPa, 2.5 MPa
3.Scope of application:
KCB type / 2 cy gear oil pump is suitable for conveying viscosity at300 c . S.t under various oil, such as crude oil, diesel oil, lubricating oil, animal and plant oil. With copper gear can handle liquid low flash point, such as gasoline, benzene, etc. Medium temperature does not exceed70℃ , the use of high temperature resistant oil pump temperature does not exceed300℃ . When the pump body with a safety valve, overloading security role. Shaft seal skeleton oil seal, mechanical seal, packing three type, indicate the order. KCB gear lubrication pump is mainly used for all kinds of mechanical equipment of conveying lubricating oil in the lubricating system, suitable for conveying viscosity in 10 oe (below75 c . S.t), the temperature is below300℃ with lubrication oil, stainless steel pump can transport edible oil, beverage and so on. Shaft seal skeleton oil seal, mechanical seal, packing three types.
4.Performance table
Model | Flow rate | Working pressure Mpa | Suction depth m | Inlet/outlet Diamm | Speed Nr/min | Motor Power kw | |
m3/h | L/min | ||||||
KCB-18.3 | 1.1 | 18.3 | 1.45 | 5 | G3/4" | 1400 | 1.5 |
KCB-33.3 | 2 | 33.3 | 1.45 | 5 | G3/4" | 1420 | 2.2 |
KCB-55 | 3.3 | 55 | 0.33 | 5 | G1" | 1400 | 1.5 |
KCB-83.3 | 5 | 83.3 | 0.33 | 5 | G1/2" | 1420 | 2.2 |
KCB-135 | 8 | 135 | 0.33 | 3 | Φ50 | 1440 | 4 |
KCB-200 | 12 | 200 | 0.33 | 3 | Φ50 | 1440 | 4 |
KCB-300 | 18 | 300 | 0.36 | 3 | Φ70 | 960 | 5.5 |
KCB-483.3 | 29 | 483.3 | 0.36 | 3 | Φ70 | 1440 | 7.5 |
KCB-633 | 38 | 633 | 0.28 | 3 | Φ100 | 970 | 11 |
KCB-960 | 58 | 960 | 0.28 | 3 | Φ100 | 1470 | 18.5 |
KCB-1200 | 72 | 1200 | 0.28 | 2 | Φ150 | 740 | 37 |
KCB-1600 | 96 | 1600 | 0.28 | 2 | Φ150 | 980 | 45 |
KCB-1800 | 110 | 1800 | 0.28 | 2 | Φ200 | 740 | 55 |
KCB-2500 | 150 | 2500 | 0.28 | 2 | Φ200 | 980 | 75 |
KCB-3800 | 230 | 3800 | 0.28 | 2 | Φ250 | 990 | 110 |
KCB-5400 | 325 | 5400 | 0.28 | 2 | Φ250 | 990 | 110 |
Contact Email:joycepump@outlook.com;whatsapp:008618031867976